Intel
Intel 710 Series 300GB 2.5" SATA internal SSD SSDSA2BZ300G301
A 300GB 2.5" SATA internal SSD with eMLC flash, up to 270MB/s read and 210MB/s write, and 2,000,000 hours MTBF
- Form Factor2.5"
- Memory ComponentseMLC
- InterfaceSATA II
- ControllerIntel
- Max Sequential ReadUp to 270MB/s
- Max Sequential WriteUp to 210MB/s
- Enterprise endurance with 2,000,000-hour MTBF
- 25nm eMLC flash delivers 1.5 PB write endurance
- 270 MB/s sequential read accelerates data access
- 5K IOPS random read boosts transactional workloads
- 5-inch SATA form factor enables HDD drop-in replacement
Intel 710 Series 300GB 2.5" SATA SSD
The Intel 710 Series is a 2.5-inch internal solid-state drive with a 300GB capacity. It connects via a SATA II interface and uses an Intel controller with 25nm eMLC flash memory. High Endurance Technology (HET) extends write endurance for demanding workloads.
Suited for write-intensive servers
This drive fits servers and storage arrays that require high write endurance and consistent random I/O performance. The 2.5-inch form factor allows direct replacement of mechanical hard drives in compatible bays. Systems needing a SATA III or faster interface should consider alternative drives.
1.5 PB lifetime write endurance on the 300 GB model
High Endurance Technology combines NAND enhancements and firmware management to deliver up to 1.5 PB of total bytes written on this capacity. This endurance rating is the key figure for determining whether the drive meets a specific workload's durability requirements.
Puncte forte
- Enterprise endurance with 2,000,000-hour MTBF
- 25nm eMLC flash delivers 1.5 PB write endurance
- 270 MB/s sequential read accelerates data access
- 5K IOPS random read boosts transactional workloads
- 5-inch SATA form factor enables HDD drop-in replacement
Specificații
| Brand | Intel |
|---|---|
| Series | 710 Series ( Lyndonville) |
| Model | SSDSA2BZ300G301 |
| Form Factor | 2.5" |
| Memory Components | eMLC |
| Interface | SATA II |
| Controller | Intel |
| Max Sequential Read | Up to 270MB/s |
| Max Sequential Write | Up to 210MB/s |
| MTBF | 2,000,000 hours |
| Features | Built with 25nm eMLC flash with High Endurance Technology (HET) to give you the longevity of an SLC SSD at a lower cost/GB Up to 270/210 MBs sustainedreads/writes Up to 38.5K/2.4K IOPs 4K random read/write (100% span)* Two million hours MTBF Lifetime endurance (4KB): Up to 1.1PB (1.5PB(with 20% over-provisioning) AES 128-bit hardware encryption Power safe write cache SATA 3Gb/s (SATA Revision 2.6) *Note: performance varies by capacity |
| Greutate la expediere | 0.09 kg |
| Dimensiunile coletului | 154 × 110 × 20 mm |
Întrebări despre acest articol
Will this 2.5-inch SATA drive fit in my server's standard drive bay?
Yes, the 2.5-inch form factor matches industry-standard SATA drive bays for direct HDD replacement.
What write endurance can I expect from the 300 GB model?
Up to 1.5 PB lifetime writes, or 3.0 PB with 20 percent over-provisioning, thanks to High Endurance Technology.
What random 4K performance does the drive deliver?
Up to 38.5K IOPS random read and 2.4K IOPS random write measured across the full drive span.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
