Intel
Intel X520-DA2 10Gbps Dual Port SFP+ network card
Dual-port 10 Gbps SFP+ adapter on a PCI-Express 2.0 x8 interface using the Intel 82599ES controller
- StandardsIEEE802.3
- Speed10Gbps
- Connectors2 x SFP+
- InterfacePCI-Express
- Dual 10 Gbps ports double throughput for demanding servers
- PCIe 2.0 x8 lane width fits X8 and X16 slots
- Intel 82599ES controller offloads processing from the CPU
- Two SFP+ cages accept multi-mode, single-mode or direct-attach modules
- IEEE 802.3 compliance ensures interoperability with 10G Ethernet networks
Dual-port 10Gbps SFP+ server adapter
The Intel X520-DA2 is a dual-port network interface card built for servers and workstations that need 10 gigabit Ethernet connectivity. It uses the Intel 82599ES controller and connects through a PCI Express 2.0 x8 slot, compatible with x8 and x16 slots. The card targets IT professionals adding high-speed links to rackmount or tower systems.
Two SFP+ cages for fibre or direct attach
Two SFP+ cages accept 10G multi-mode modules, single-mode modules or direct-attach copper cables, letting you choose the reach and media type per link. Each port runs at 10Gbps line rate under IEEE 802.3 10BASE-SR and 10BASE-LR standards. The x8 5GT/s bus provides enough bandwidth for both ports simultaneously without saturation.
Low-profile bracket fits dense chassis
A low-profile bracket allows installation in 1U and 2U rackmount servers where full-height cards do not fit. The SFP+ cages face the rear bulkhead for clean cable routing in hot-aisle or cold-aisle layouts. No onboard transceivers are included, so you supply the optics or DACs that match your switch ports and distance requirements.
Puncte forte
- Dual 10 Gbps ports double throughput for demanding servers
- PCIe 2.0 x8 lane width fits X8 and X16 slots
- Intel 82599ES controller offloads processing from the CPU
- Two SFP+ cages accept multi-mode, single-mode or direct-attach modules
- IEEE 802.3 compliance ensures interoperability with 10G Ethernet networks
Specificații
| Brand | Intel |
|---|---|
| Model | X520-DA2 |
| Part Number | X520-DA2 |
| Standards | IEEE802.3 |
| Speed | 10Gbps |
| Connectors | 2 x SFP+ |
| Interface | PCI-Express |
Întrebări despre acest articol
Will this card run at 10 Gbps in my PCIe 2.0 x8 slot?
The card uses a PCIe 2.0 x8 electrical interface and is compatible with x8 or x16 slots, so it will deliver the full 10 Gbps rate in a PCIe 2.0 x8 slot.
How can I verify both SFP+ ports are linked at 10 Gbps after installation?
Check the adapter LEDs or the OS network status; each port should show a 10 Gbps link when a supported SFP+ module and cable are connected.
Does the box include SFP+ transceivers or cables, or must I buy them separately?
The adapter ships without transceivers or cables; you must purchase compatible SFP+ modules or direct-attach cables separately.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
NVIDIA ConnectX-7 MCX75343AMS-NEAC 400GbE network card
- InfiniBand: NDR/NDR…
- Single-port OSFP In…



