NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.
KEHIPI
Four USB-C to TTL serial adapters with FT232RL chip, 3.3V or 5.5V operation and 500mA self-restore fuse
This set contains four FR232RL modules that convert a USB-C port to a 3.3 V or 5.5 V TTL serial link. Each board uses an integrated FT232R chip with a built-in 500 mA self-restoring fuse. The red PCBs expose DTR, RXD, TXD, VCC, CTS and GND pins on a 2.54 mm pitch for breadboard use.
Verify that your target microcontroller runs at 3.3 V or 5 V logic to match the adapter’s selectable supply. The driver package supports Windows 95 through Windows 7 in both 32-bit and 64-bit editions but does not support Windows 8. Confirm your development machine runs a compatible operating system before ordering.
The FT232R integrates the oscillator, EEPROM and USB termination resistors, so the module draws minimal power and produces no audible noise. The on-board 500 mA fuse limits current during a short circuit and resets automatically once the fault clears. In normal use the board runs cool without a heatsink or fan.
| Brand | AITRIP |
|---|---|
| Model | FR232RL |
The box contains four FR232RL red Type‑C to TTL adapter modules. No additional parts are required for basic UART use; the FT232R chip integrates the oscillator, EEPROM and USB matching resistors.
Each module can be powered from the USB port at either 3.3 V or 5 V. Select the voltage that matches your target board — 3.3 V for 3.3 V logic devices, 5 V for 5 V logic — using the on‑board jumper or solder bridge.
The built‑in 500 mA polyfuse limits current drawn from the host USB port. If a short or overload occurs on the VCC pin, the fuse trips and automatically resets once the fault is cleared, protecting the laptop port.
Tot din acest raion
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
În ce monedă plătiți și în ce monedă citiți prețurile.
Trimis din portofelul dumneavoastră la finalizarea comenzii
Doar pentru afișare — catalogul este exprimat în dolari
Nicio monedă nu corespunde.
Alegeți limba în care vă vorbește site-ul.
Prima vizită?
Aveți deja un cont?
Nu există o resetare automată: acest magazin nu trimite niciun e-mail, deci nu există niciun link de unică folosință de solicitat. Lăsați adresa în cont. Va fi tratată manual.
Cerere înregistrată
Nu veți primi nimic în căsuța de e-mail — acest magazin nu trimite niciun e-mail. Cineva se ocupă de asta manual.
V-ați amintit-o?