Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
20 pneumatic fittings with blue PTFE tube, copper and stainless steel threads

KEHIPI

KEHIPI PC4-M6 & PC4-M10 Pneumatic Fittings Kit 20pcs 3D Printers Accessories

SKU CH-MHAX-37EMW

Kit includes four PC4-M6 and four PC4-M10 push-to-connect fittings plus two 1.5 m PTFE tubes for 1.75 mm filament Bowden extruders

  • Color10*(PC4-M6 & PC4-M10)
  • Secure Bowden connections with push-to-connect M6 and M10 fittings
  • 20-piece kit includes four PC4-M6 and four PC4-M10 fittings plus PTFE tubing
  • Copper PC4-M6 fittings resist wear; stainless-steel PC4-M10 fittings resist corrosion
  • 3 metres of 4 mm OD PTFE tube supplied in two 1.5 m lengths
  • Works with 1.75 mm filament on Ender 2, Ender 3, CR-10 and Monoprice Mini printers

KEHIPI PC4-M6 & PC4-M10 Fittings Kit

This 20-piece kit supplies PC4-M6 and PC4-M10 pneumatic push-to-connect fittings plus PTFE tubing for Bowden extruders on 1.75 mm filament printers. It suits makers who maintain or upgrade machines such as Ender 2, Ender 3, CR-10 or Monoprice Mini models and want a ready assortment of both thread sizes.

Thread M6 and M10 limits for 4 mm OD tubing

Both fitting types accept only tube with a 4.0 mm outside diameter and a 4 mm inner bore at the collet end. The M6 variants use a 6 mm thread while the M10 variants use a 10 mm thread, so each size fits only the matching threaded port on the hot-end or extruder body. The included 1.5 m PTFE tubes have a 2.0 mm inside diameter and 4.0 mm outside diameter.

Mixed copper and stainless steel construction

PC4-M6 fittings are made from copper and plastic, while PC4-M10 fittings use stainless steel and plastic for anti-oxidation and high hardness. This material split decides whether the kit matches the specific port metallurgy your printer requires.

Puncte forte

  • Secure Bowden connections with push-to-connect M6 and M10 fittings
  • 20-piece kit includes four PC4-M6 and four PC4-M10 fittings plus PTFE tubing
  • Copper PC4-M6 fittings resist wear; stainless-steel PC4-M10 fittings resist corrosion
  • 3 metres of 4 mm OD PTFE tube supplied in two 1.5 m lengths
  • Works with 1.75 mm filament on Ender 2, Ender 3, CR-10 and Monoprice Mini printers

Specificații

BrandAITRIP
ModelAT-PC4-Tube
Color10*(PC4-M6 & PC4-M10)

Întrebări despre acest articol

Should I choose the PC4-M6 or PC4-M10 fittings for my printer?

The kit includes 4 PC4-M6 fittings with 6 mm threads and 4 PC4-M10 fittings with 10 mm threads; both accept 4 mm OD Bowden tube. Select the thread size that matches your extruder and hot-end ports.

How does the 2.0 mm inner diameter of the PTFE tube affect 1.75 mm filament?

The 2.0 mm ID tube leaves a small clearance around 1.75 mm filament, reducing friction and helping consistent feeding through the Bowden path.

What does the push-to-connect interface mean for installation?

Push the 4 mm OD tube into the fitting until it seats; the internal collet grips automatically. To release, press the collet down and pull the tube out.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.