Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Rectangular silver ATX power supply unit with fan grille and rear power socket

KHACHIMO

KHACHIMO 675W ATX Power Supply YM-2751A CP-1103R2

SKU CH-XBT6-X0V8H

ATX power supply delivering 675 W with 80 PLUS Gold efficiency, zero-RPM fan mode and LLC resonant DC-to-DC topology for silent, stable operation

  • TypeATX
  • Modern Standby support enables extremely fast wake-from-sleep and better low-load efficiency
  • 80 PLUS Gold certification delivers high efficiency for lower consumption, less noise and cooler temperatures
  • Zero RPM fan mode stops the cooling fan at low and medium loads for near-silent operation
  • Resonant LLC topology with DC-to-DC conversion provides clean power, reduces coil whine and enables efficient sleep states
  • 675W ATX output compatible with NetApp FAS2040 and FAST2020 systems

Targeted Compatibility

This 675 W ATX power supply is built specifically for NetApp FAS2040 and FAST2020 storage systems. It serves administrators who need a direct replacement unit that matches the original YM-2751A and CP-1103R2 part numbers.

Not a General-Purpose Unit

Builders assembling standard desktop PCs or servers should look elsewhere because the connector layout and form factor are tailored to the listed NetApp appliances. Buyers who need modular cables, a different output distribution, or a retail ATX footprint will not be able to use this unit.

675 Watt Output

The single deciding specification is the 675 W rated capacity, which must match the power budget of the FAS2040 or FAST2020 chassis. If the target system requires a different wattage, this supply will not meet the requirement.

Puncte forte

  • Modern Standby support enables extremely fast wake-from-sleep and better low-load efficiency
  • 80 PLUS Gold certification delivers high efficiency for lower consumption, less noise and cooler temperatures
  • Zero RPM fan mode stops the cooling fan at low and medium loads for near-silent operation
  • Resonant LLC topology with DC-to-DC conversion provides clean power, reduces coil whine and enables efficient sleep states
  • 675W ATX output compatible with NetApp FAS2040 and FAST2020 systems

Specificații

TypeATX

Întrebări despre acest articol

How can I verify the 675W PSU is working correctly after installation?

Confirm the system powers on, runs stress tests without shutdowns, and the fan remains off at idle thanks to Zero RPM mode while the 80 PLUS Gold efficiency keeps temperatures low.

What comes with the YM-2751A and what must be sourced separately?

The unit includes the 675W ATX power supply with CP-1103R2 labeling; standard AC power cord and mounting screws are typically required but not included.

Which capacity matches a NetApp FAS2040 or FAST2020 replacement?

Choose the 675W version (YM-2751A / CP-1103R2) as it is the specified wattage for those NetApp models.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.