Kingston Technology Corp.
Kingston Technology Corp. 16GB DDR3-1600MHz 2Rx4 PC3-12800R ECC Registered SL16D316R11D4KF desktop RAM
16 GB DDR3 ECC registered memory running at 1600 MHz with 2Rx4 organisation
- 16 GB capacity supports demanding workloads
- DDR3-1600MHz speed enables fast data transfer
- ECC registered design detects and corrects errors
- 2Rx4 organisation optimises signal integrity
- PC3-12800R rating confirms high bandwidth
16GB DDR3-1600 ECC Registered Module
This 16 GB DDR3-1600 module is built for desktop systems that require registered ECC memory. The 2Rx4 organisation and PC3-12800 rating suit workstations and entry-level servers needing error correction. It is not for consumer boards that only accept unbuffered non-ECC DIMMs.
Registered ECC Changes System Behaviour
The registered buffer reduces electrical load on the memory controller, allowing larger populations of DIMMs per channel. ECC circuitry detects and corrects single-bit errors, protecting data integrity in long-running compute tasks. Standard desktop motherboards without registered ECC support cannot use this module.
PC3-12800 Speed Rating Decides Fit
The module runs at 1600 MHz with a PC3-12800 bandwidth rating. This single speed figure determines whether the memory matches the platform's qualified vendor list. Builders must verify that their motherboard and CPU officially support DDR3-1600 registered ECC before purchase.
Puncte forte
- 16 GB capacity supports demanding workloads
- DDR3-1600MHz speed enables fast data transfer
- ECC registered design detects and corrects errors
- 2Rx4 organisation optimises signal integrity
- PC3-12800R rating confirms high bandwidth
Specificații
Nicio specificație publicată pentru acest articol deocamdată.
Întrebări despre acest articol
Will the 2Rx4 ECC registered DIMMs need firmware updates or re-qualification after extended use?
ECC registered DIMMs do not require firmware updates; they operate to the JEDEC DDR3-1600 standard and the on-board register handles signal integrity for the module lifetime.
What thermal or timing limit appears first when the memory runs continuously at 1600 MHz?
The DDR3-1600 JEDEC timing of 11-11-11 and the registered buffer keep electrical margins within spec, so no thermal or timing limit is reached before the platform's own memory-controller safeguards.
How much extra heat or power draw do the register and ECC logic add during all-day operation?
The register and ECC logic add only a few milliwatts per DIMM over an unbuffered module, so case temperature rise stays within normal DDR3 operating limits.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.



