Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

Kingston Technology Corp.

Kingston Technology Corp. Fury 16GB DDR5 5600 CL36 2x8GB desktop RAM KF556C36BBEK2-16

SKU CH-Q7ZX-TAT0R MPN KF556C36BBEK2-16

A 16 GB dual-channel DDR5 kit running at 5600 MT/s with CL36 latency and a black heat spreader

  • Capacity16GB (2 x 8GB)
  • Type288-Pin PC RAM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL36
  • Timing36-38-38
  • Voltage1.25V
  • Dual-channel 16 GB kit enables higher bandwidth
  • DDR5 5600 speed with CL36 latency for responsive performance
  • Low 1.25 V operation reduces power draw
  • AMD EXPO 1.0 support simplifies one-click overclocking
  • Black heat spreader keeps modules cool under load

Kingston Fury DDR5 5600 Dual-Channel Kit

This 16GB kit contains two 8GB unbuffered DIMMs rated for DDR5 5600 with CL36 timing. It targets AMD EXPO systems and also supports Intel XMP 3.0 for one-click overclocking. Black heat spreaders cover each module.

Check Motherboard DDR5 Support And Slot Count

Verify that your motherboard accepts DDR5 memory and has at least two free 288-pin slots for dual-channel operation. The kit runs at 1.25V for the 5600 profile and falls back to JEDEC 4800 at 1.1V if the faster profile is not enabled. No ECC or registered buffers are present.

Suits AMD EXPO Builds Wanting 16GB At 5600

Builders who need a matched pair at this speed and latency will find it a direct fit. Users requiring ECC, higher capacities, or lower latencies should evaluate other kits.

Puncte forte

  • Dual-channel 16 GB kit enables higher bandwidth
  • DDR5 5600 speed with CL36 latency for responsive performance
  • Low 1.25 V operation reduces power draw
  • AMD EXPO 1.0 support simplifies one-click overclocking
  • Black heat spreader keeps modules cool under load

Specificații

BrandKingston
SeriesKingston Fury
ModelKF556C36BBEK2-16
Part NumberKF556C36BBEK2-16
Capacity16GB (2 x 8GB)
Type288-Pin PC RAM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL36
Timing36-38-38
Voltage1.25V
ECCNo
Buffered/RegisteredUnbuffered / Unregistered
Multi-channel KitDual Channel Kit
ChipsetAMD EXPO
ColorBlack
Heat SpreaderYes
FeaturesKingston FURY KF556C36BBEK2-16 is a kit of two 1G x 64-bit
(8GB) DDR5-5600 CL36 SDRAM (Synchronous DRAM) 1Rx16,
memory module, based on four 1G x 16-bit FBGA components per
module. Each module kit supports AMD® EXPO v1.0 and
Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Total kit
capacity is 16GB. Each module has been tested to run at
DDR5-5600 at a low latency timing of 36-38-38 at 1.25V. The
SPDs are programmed to JEDEC standard latency
DDR5-4800 timing of 40-39-39 at 1.1V. Each 288-pin DIMM
uses gold contact fingers. The JEDEC standard electrical
and mechanical specifications a
Recommend UseAMD EXPO
LED ColorNone
Greutate la expediere0.16 kg
Dimensiunile coletului339 × 89 × 17 mm

Întrebări despre acest articol

Will this kit run at DDR5-5600 on an Intel platform?

The kit supports Intel XMP 3.0 profiles for DDR5-5600 operation on compatible Intel motherboards.

Does the 1.25 V operating voltage require a specific motherboard feature?

Standard DDR5 motherboards supply 1.25 V for XMP and EXPO profiles; no special feature is needed.

What is the default speed if I do not enable a profile?

The SPD is programmed to JEDEC DDR5-4800 at 40-39-39 timing and 1.1 V.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.