BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00278759BTC
În stoc
Kingston Technology Corp.
Kingston Technology Corp. KF560R32RBEK4-64 64GB (4×16GB) DDR5-6000 CL32 RDIMM ECC
A 64 GB quad-channel DDR5-6000 CL32 registered ECC kit with four 16 GB modules at 1.35 V
- Capacity64GB (4 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6000 (PC5 48000)
- CAS LatencyCL32
- Timing32-38-38
- Voltage1.35V
- 6000 MHz DDR5 speed with CL32 latency runs heavy workloads smoothly
- 64 GB quad-channel kit (4 × 16 GB) matches modern CPU architectures
- Registered ECC RDIMM detects and corrects multi-bit errors for data integrity
- 35 V operation with on-die ECC reduces system lock-ups and corruption
- Low-profile heat spreader on 288-pin modules maintains thermal performance
Registered ECC DDR5 for workstations
This 64 GB kit delivers four 16 GB DDR5-6000 RDIMM modules with CL32 latency and registered signal processing. It targets creators, engineers and data-science professionals who need server-grade error correction on Intel or AMD workstation platforms that require registered DIMMs.
64 GB quad-channel capacity and 6000 MHz headroom
The four-module kit populates a quad-channel controller for maximum bandwidth, while the 6000 MHz data rate and 32-38-38 timings keep latency low for heavy multitasking. Workloads that exceed 64 GB or demand higher frequencies will need additional modules or a faster kit.
On-die ECC and registered buffering included
Every DDR5 component provides on-die single-bit error correction, and the registered architecture adds multi-bit ECC detection and correction across the module. No extra software or accessories are bundled; the reliability features are built into the memory itself.
Puncte forte
- 6000 MHz DDR5 speed with CL32 latency runs heavy workloads smoothly
- 64 GB quad-channel kit (4 × 16 GB) matches modern CPU architectures
- Registered ECC RDIMM detects and corrects multi-bit errors for data integrity
- 35 V operation with on-die ECC reduces system lock-ups and corruption
- Low-profile heat spreader on 288-pin modules maintains thermal performance
Specificații
| Brand | Kingston |
|---|---|
| Series | Fury Renegade Pro |
| Model | KF560R32RBEK4-64 |
| Capacity | 64GB (4 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6000 (PC5 48000) |
| CAS Latency | CL32 |
| Timing | 32-38-38 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Multi-channel Kit | Quad Channel Kit |
| Heat Spreader | Yes |
| Greutate la expediere | 0.11 kg |
| Dimensiunile coletului | 165 × 104 × 38 mm |
Întrebări despre acest articol
Can these 6000 MHz DDR5 RDIMM modules run in the same system as slower DDR5 registered DIMMs?
The kit is rated at 6000 MT/s CL32 1.35 V; all installed DDR5 RDIMMs will operate at the lowest common speed and voltage, so slower modules will pull the kit down to their own rated frequency and timings.
How can I verify the 6000 MT/s CL32 1.35 V profile is active after installation?
Enter the firmware or use a utility such as CPU-Z and confirm the memory reports 6000 MT/s, timings 32-38-38 and 1.35 V on all four 16 GB modules.
Does the box contain only the four 16 GB RDIMMs or are cables, screws or a CPU cooler included?
The package supplies the four 16 GB DDR5 RDIMM modules with heat spreaders; no cables, mounting hardware or cooling accessories are bundled.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
