Kioxia
Kioxia KCD8XPUG1T92 1.92TB 2.5" U.2/U.3 15mm PCIe 5.0 NVMe internal SSD
A 1.92 TB PCIe 5.0 NVMe drive in a 2.5 inch 15 mm form factor, built for read-intensive data centre workloads with 1 DWPD endurance
- Device TypeInternal Solid State Drive (SSD)
- PCIe 5.0 interface enables up to 2,000K random read IOPS for fast data access
- 92TB capacity with 1 DWPD endurance supports read-intensive data center workloads
- 5-inch 15mm form factor fits high-density storage deployments
- Power loss protection and end-to-end data correction protect data integrity
- Kioxia BiCS FLASH Gen 5 TLC and proprietary controller deliver consistent 24x7 performance
Data-centre read-intensive SSD
The Kioxia KCD8XPUG1T92 is a 1.92 TB internal SSD built for scale-out and cloud workloads such as big data, online transaction processing and virtualization. Its single-port design targets consistent performance in 24x7 environments. The drive uses Kioxia BiCS FLASH generation 5 TLC memory and a proprietary controller.
Sustained load behaviour
Under continuous operation the drive delivers up to 2,000K IOPS random read and 200K IOPS random write with power-loss protection and end-to-end data correction active. It is rated at 1 DWPD endurance for read-intensive duty cycles. Sequential read throughput increases 60 to 80 percent over the previous PCIe 4.0 generation.
Compatibility check
Verify that your system provides a 2.5-inch U.2 or U.3 bay with 15 mm clearance and a PCIe 5.0 x4 link running NVMe 2.0. The drive requires 32 GT/s signalling and Open Compute Project Datacenter NVMe SSD specification v2.0 support for full feature enablement.
Puncte forte
- PCIe 5.0 interface enables up to 2,000K random read IOPS for fast data access
- 92TB capacity with 1 DWPD endurance supports read-intensive data center workloads
- 5-inch 15mm form factor fits high-density storage deployments
- Power loss protection and end-to-end data correction protect data integrity
- Kioxia BiCS FLASH Gen 5 TLC and proprietary controller deliver consistent 24x7 performance
Specificații
| Device Type | Internal Solid State Drive (SSD) |
|---|---|
| Greutate la expediere | 0.14 kg |
| Dimensiunile coletului | 203 × 152 × 51 mm |
Întrebări despre acest articol
Will the 15 mm thickness fit my server drive bay?
The drive is a 2.5 inch form factor with a 15 mm height. Check your server or storage chassis specifications to confirm it accepts 15 mm drives before purchasing.
What workloads is the 1 DWPD endurance rating suited for?
One drive write per day supports read intensive tasks such as big data analytics, online transaction processing and virtualization where writes are moderate compared to reads.
Does the PCIe 5.0 interface require a specific CPU or motherboard generation?
The SSD uses a PCIe 5.0 x4 NVMe 2.0 connection. Your system must provide a compatible U.2 or U.3 backplane and a PCIe 5.0 capable CPU or switch to reach the stated performance.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
