Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green PCB HAT with motor driver chips and screw terminals for Raspberry Pi Pico

LORDWORLD

LORDWORLD DC Motor Driver HAT for Pico 4 Motors I2C PCA9685 TB6612FNG 3A

SKU CH-4Q4H-B0NMB

I2C motor driver HAT controls four DC motors at up to 3A each using 12-bit PWM and dual H-bridge chips

  • Drives four DC motors simultaneously with the onboard TB6612FNG dual H-bridge
  • Adjusts speed precisely using 12-bit hardware PWM from the PCA9685 chip
  • Selects from 32 I2C addresses via five address jumpers for multi-board stacks
  • Powers the Pico and motors from a battery through the VIN terminal with the 5 V regulator
  • Leaves unused Pico pins accessible through breakout headers for additional sensors

DC Motor Driver HAT for Pico

The LORDWORLD HAT fits the standard Raspberry Pi Pico header and drives up to four DC motors through an onboard TB6612FNG dual H-bridge. A PCA9685 chip provides 12-bit hardware PWM for speed control over I2C. An integrated 5V regulator supplies up to 3A and accepts battery power via the VIN terminal.

Compatibility checks before ordering

Verify that your Pico board uses the standard 40-pin header so the HAT seats correctly. Confirm your motors operate within the 3A per channel limit of the TB6612FNG driver. Ensure your I2C bus can accommodate one of the 32 selectable addresses set by the five onboard jumpers.

What the onboard features change

The PCA9685 offloads PWM generation from the Pico, freeing processor cycles for other tasks. The TB6612FNG dual H-bridge delivers efficient drive with reduced heating compared to single-bridge alternatives. Broken-out unused Pico pins allow additional sensors or modules without a separate prototyping board.

Puncte forte

  • Drives four DC motors simultaneously with the onboard TB6612FNG dual H-bridge
  • Adjusts speed precisely using 12-bit hardware PWM from the PCA9685 chip
  • Selects from 32 I2C addresses via five address jumpers for multi-board stacks
  • Powers the Pico and motors from a battery through the VIN terminal with the 5 V regulator
  • Leaves unused Pico pins accessible through breakout headers for additional sensors

Specificații

BrandLORDWORLD

Întrebări despre acest articol

What comes in the box and do I need to buy a Raspberry Pi Pico separately?

The package contains the motor driver HAT with onboard PCA9685 and TB6612FNG chips. A Raspberry Pi Pico series board is not included and must be purchased separately.

How do I select the right I2C address if I plan to stack multiple boards?

Five address jumpers on the HAT let you configure 32 different I2C addresses, so each board can have a unique address when stacked.

What does the 3 A output rating mean when the board is driving four motors?

The integrated 5 V regulator supplies up to 3 A total, shared across all four motor channels and any other connected loads.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.