Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Metal enclosure for Raspberry Pi CM5 IO board with cooling fan and 40-pin GPIO adapter

LORDWORLD

LORDWORLD Metal Case for Raspberry Pi CM5 IO Board with 40PIN GPIO Adapter and Cooling Fan

SKU CH-JQ36-H288V

Dust-proof metal chassis houses the Raspberry Pi CM5 IO board with a cooling fan, 40-pin GPIO adapter and wall-mount holes for industrial or DIY projects

  • Durable metal chassis protects the Compute Module 5 IO board from dust and impact
  • Integrated cooling fan and vent prevent overheating during extended operation
  • 40PIN GPIO adapter keeps standard header accessible for HAT expansion
  • Precisely cut and labelled ports give instant access to every interface
  • Dual-side mounting holes enable secure wall installation for industrial deployments

Metal Case for Raspberry Pi CM5 IO Board

This metal case is built for the official Raspberry Pi Compute Module 5 IO Board, giving makers and industrial users a dust-proof chassis for mini PC or edge projects. It includes a 40PIN GPIO adapter so standard HATs can be connected directly. Wall-mount holes on both sides support fixed installations in cabinets or PoE-powered setups.

Installation and Common Issues

The case aligns precisely with every port on the CM5 IO Board, and each cut-out is clearly labeled for straightforward assembly. The 40PIN GPIO adapter seats onto the board header before the lid is closed, preserving the standard pinout for HATs. The only extra step is routing the included cooling fan power to the board’s fan header; forgetting this connection leaves the fan inactive.

Capacity and Headroom

The enclosure handles continuous operation of a Compute Module 5 under typical industrial or DIY workloads, with the fan and vent moving air across the module. It runs out of thermal headroom when the CM5 sustains maximum CPU and GPU load for extended periods without additional heatsinking on the module itself. The single 40PIN header also limits expansion to one HAT at a time.

Puncte forte

  • Durable metal chassis protects the Compute Module 5 IO board from dust and impact
  • Integrated cooling fan and vent prevent overheating during extended operation
  • 40PIN GPIO adapter keeps standard header accessible for HAT expansion
  • Precisely cut and labelled ports give instant access to every interface
  • Dual-side mounting holes enable secure wall installation for industrial deployments

Specificații

BrandLORDWORLD

Întrebări despre acest articol

How can I confirm the cooling fan is operating correctly after installing the Raspberry Pi CM5 IO Board?

Power on the board and listen for the fan spinning; airflow through the vent should be felt, and the CM5 should remain at safe temperatures during sustained workloads.

What components are included in the package and what must be sourced separately?

The package contains the metal chassis, a pre-installed cooling fan, and a 40PIN GPIO adapter; the Raspberry Pi Compute Module 5 and its official IO Board are not included and must be purchased separately.

Which version of the 40PIN GPIO adapter should I select for my Compute Module 5 IO Board?

The case ships with a single 40PIN GPIO adapter that matches the standard header on the official Raspberry Pi CM5 IO Board, so no alternative versions need to be chosen.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.