Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green circuit board with 40-pin header, Ethernet jack, USB-A port, and cooling fan

MCDODO

MCDODO PoE HAT Raspberry Pi 40pin 802.3af/at 5V 12V MP8676 Fan

SKU CH-EKFB-HM0EP

Adds 5 V USB-A and 12 V header power plus a cooling fan to Raspberry Pi 3B+/4B via 40-pin GPIO using 802.3 af/at PoE

  • TypeSingle Board Computers
  • Powers Raspberry Pi 3B+ or 4B over Ethernet
  • IEEE 802.3 af/at standard delivers power and data on one cable
  • Fully isolated SMPS with MP8676 buck chip provides stable 5 V and 12 V
  • On-board USB Type-A port powers extra peripherals directly
  • High-speed active cooling fan keeps temperatures low under load

Power Over Ethernet HAT for Raspberry Pi

The MCDODO PoE HAT adds Power over Ethernet capability to Raspberry Pi 3B+ and 4B models through the 40-pin GPIO header. It accepts power from networks compliant with IEEE 802.3 af/at standards. The board delivers both 5 V via a USB Type-A port and 12 V through a header to run the Pi and attached peripherals.

Practical limits of the PoE standard

The HAT draws its supply from the Ethernet cable, so the connected switch or injector must provide power under the 802.3 af or at specifications. Total output current is shared between the Raspberry Pi and any device plugged into the USB-A port. Cable length and quality affect voltage drop, which may reduce available power at the board.

Installation notes and common issues

The HAT mounts directly onto the 40-pin GPIO header with no soldering required. An onboard fan provides active cooling and connects to the board for automatic operation. Ensure the fan cable is seated correctly and that the PoE source is active before booting the Pi. The isolated SMPS design helps protect the Pi from ground-loop issues.

Puncte forte

  • Powers Raspberry Pi 3B+ or 4B over Ethernet
  • IEEE 802.3 af/at standard delivers power and data on one cable
  • Fully isolated SMPS with MP8676 buck chip provides stable 5 V and 12 V
  • On-board USB Type-A port powers extra peripherals directly
  • High-speed active cooling fan keeps temperatures low under load

Specificații

TypeSingle Board Computers

Întrebări despre acest articol

Which PoE standard should I pick for my Raspberry Pi 4B or 3B+?

The HAT works with both IEEE 802.3 af and at, so it fits either standard on your 40-pin board.

What does the 802.3 af/at rating mean when the HAT is running on my Pi?

It delivers isolated 5 V to the USB-A port and 12 V to the header, powering the Pi and extra devices from the Ethernet cable.

How does the 40-pin GPIO interface affect the power delivery?

The 40-pin header carries the converted 5 V and 12 V rails from the MP8676 buck chip while the onboard fan keeps the board cool.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.