Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green circuit board with black memory chips and gold edge connector

Micron Technology, Inc.

Micron Technology 8GB DDR3L 1866MT/s CL13 Desktop RAM

SKU CH-411G-WN9CS

8GB DDR3L desktop memory module running at 1866 MT/s with CL13 latency and 1.35V operation

  • Capacity8GB
  • SpeedDDR3L 1866 (PC3L 14900)
  • CAS LatencyCL13
  • Voltage1.35V
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • Low-voltage 1.35 V DDR3L reduces power draw
  • 8 GB capacity adds headroom for multitasking
  • 1866 MT/s speed supports responsive desktop performance
  • CL13 latency delivers quick data access
  • Unbuffered non-ECC design suits standard desktop builds

8GB DDR3L 1866MT/s module

This Micron Technology desktop memory module provides 8GB of capacity at 1866MT/s with CL13 latency. It operates at the DDR3L standard voltage of 1.35V and uses an unbuffered, non-ECC design. The 2Rx8 chip organisation is built on Micron components.

Suits DDR3L platform maintenance

This module fits desktop systems that specifically require DDR3L SODIMM or UDIMM memory running at 1.35V. It is not for builders needing ECC error correction or registered signal buffering. Buyers whose boards only accept standard 1.5V DDR3 should look elsewhere. Systems requiring higher density than 8GB per slot cannot use this part.

1.35V DDR3L voltage requirement

The single specification that decides fit is the 1.35V operating voltage. A motherboard must support the DDR3L standard to run this memory correctly. If the platform only supplies 1.5V to the memory slots, this module is not the right choice. Verify the board manual for DDR3L compatibility before purchase.

Puncte forte

  • Low-voltage 1.35 V DDR3L reduces power draw
  • 8 GB capacity adds headroom for multitasking
  • 1866 MT/s speed supports responsive desktop performance
  • CL13 latency delivers quick data access
  • Unbuffered non-ECC design suits standard desktop builds

Specificații

Capacity8GB
SpeedDDR3L 1866 (PC3L 14900)
CAS LatencyCL13
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMicron Chipset

Întrebări despre acest articol

Does the Micron 8GB DDR3L 1866MT/s CL13 module ship alone or with extra parts?

The module is sold as a single 8GB UDIMM; no additional brackets, cables or software are included.

Should I choose the 1866MT/s CL13 version or a different speed for my board?

Select this 1866MT/s CL13 stick if your motherboard supports DDR3L at that frequency; otherwise pick the speed your board specifies.

What does the 1866MT/s rating deliver once the RAM is installed?

It provides a peak transfer rate of PC3L-14900 at 1.35V with CAS latency 13, giving standard DDR3L desktop bandwidth.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.