Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black 24-pin 90-degree power adapter, rectangular block 58 by 37 by 18 mm

myVolts

myVolts 24-pin 90° power adapter 58x37x18mm

SKU CH-YQPJ-TJH6R

A 24-pin ATX power connector with a 90-degree turn that reduces cable height and eases rear-chassis routing

  • TypeAT
  • Reduces cable height with a 90 degree turn
  • Lead-free SMT welding for firm connections
  • Thickened PCBA handles excessive current safely
  • EVA insulation on back protects solder joints
  • Compact 58 by 37 by 18 millimetre form factor

24-pin 90° ATX power adapter

This right-angle adapter connects a standard 24-pin ATX cable to a motherboard socket. The 90-degree turn reduces the vertical profile of the power connector, helping cables route cleanly behind the motherboard tray in compact cases. It suits system builders who need extra clearance for side-panel glass or tight routing channels. The unit is supplied new and ready for immediate installation.

Replaces a straight 24-pin plug when space is tight

Use this adapter when a standard straight connector blocks the side panel or forces sharp cable bends that strain the motherboard socket. The upgrade is worth it in small-form-factor builds where every millimetre counts, or when a bulky cable prevents the case from closing. It is not for builders who have ample room behind the motherboard tray and no clearance issues.

Limited to 24-pin ATX motherboards

The adapter works only with 24-pin ATX power connectors and matching cables; it does not fit proprietary or server-style power interfaces. The 90-degree orientation is fixed, so the cable exit direction cannot be rotated to suit alternative routing paths. The ABS housing and thickened PCBA handle typical desktop currents, but the part adds a small junction that must remain accessible for inspection.

Puncte forte

  • Reduces cable height with a 90 degree turn
  • Lead-free SMT welding for firm connections
  • Thickened PCBA handles excessive current safely
  • EVA insulation on back protects solder joints
  • Compact 58 by 37 by 18 millimetre form factor

Specificații

TypeAT

Întrebări despre acest articol

How much clearance does the 58 mm by 37 mm by 18 mm adapter need behind the motherboard?

The right-angle body measures 58 mm long, 37 mm wide and 18 mm deep, so allow at least 18 mm of space behind the 24-pin socket for the bend.

Which way should the 90 degree bend face when I plug it into the 24-pin header?

Orient the adapter so the cable exits toward the rear panel; the 90 degree turn points the wires parallel to the board, reducing strain on the header.

Will the ABS housing and EVA insulation on the back degrade from heat inside the case?

The thickened PCBA and non-conductive EVA layer are rated for continuous high-current use and protect solder joints from typical chassis temperatures.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.