Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Compact bench power supply with green four-digit LED display and rotary knobs

myVolts

myVolts 60V 5A Bench Power Supply 4-Digit LED Display

SKU CH-ZCXW-D883A

A 60 V 5 A bench power supply with 0.01 V and 0.001 A resolution, CV/CC auto-switching, and a 4-digit LED display

  • TypeAT
  • 0–60 V and 0–5 A output with 0.01 V and 0.001 A resolution for precise control
  • Automatic C.C. and C.V. mode switching maintains stable operation under varying loads
  • Built-in fan with thermo-sensor and dual heat sinks keep the unit cool and extend service life
  • Multiple protection circuits include current limit, thermal, over-voltage and short-circuit safeguards
  • Compact 226 × 82 × 138 mm case weighing 2.95 lb suits bench or portable use

60V 5A Bench Power Supply

The myVolts unit delivers 0 to 60 volts and 0 to 5 amps from a single channel. A four-digit LED display shows values with 0.01 V and 0.001 A resolution. Coarse and fine knobs let you dial in precise voltage or current limits. It operates in constant-voltage or constant-current mode with automatic crossover.

Replaces fixed-voltage adapters

Swap out wall warts when you need adjustable output for 48 V equipment, battery charging, electroplating or lab prototypes. The jump is worth it when a project demands repeatable current limiting, overload protection or thermal shutdown that fixed supplies lack. Built-in fan and dual heatsinks keep the unit stable during long sessions.

Suits hobbyists and repair techs

Engineers who want a compact 226 by 82 by 138 mm bench supply at 2.95 lb will appreciate the portability. Buyers who need more than 60 V, more than 5 A, multi-channel output or programmable remote control should look at something else.

Puncte forte

  • 0–60 V and 0–5 A output with 0.01 V and 0.001 A resolution for precise control
  • Automatic C.C. and C.V. mode switching maintains stable operation under varying loads
  • Built-in fan with thermo-sensor and dual heat sinks keep the unit cool and extend service life
  • Multiple protection circuits include current limit, thermal, over-voltage and short-circuit safeguards
  • Compact 226 × 82 × 138 mm case weighing 2.95 lb suits bench or portable use

Specificații

TypeAT

Întrebări despre acest articol

What bench space does the 226 by 82 by 138 mm unit need?

The supply measures 226 mm wide, 82 mm high and 138 mm deep, so allow at least that footprint plus a few centimetres behind for the rear fan exhaust.

How do I set the current limit before connecting a load?

Short the output leads, then turn the coarse and fine current knobs until the display shows the desired amperage; the supply will hold that limit when the load is attached.

What routine care does the built-in cooling fan require?

Periodically blow dust out of the fan vents and the two heat sinks to keep airflow clear and the thermo-sensor functioning correctly.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.