Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Rectangular AT power supply unit with metal casing and wire control connector

myVolts

myVolts DPS-250AB-44B AT power supply

SKU CH-2TVE-88QS9

AT power supply rated at 250 W for cameras, video cameras and universal wire‑controlled devices

  • TypeAT
  • AT form factor fits legacy systems
  • 250 W output powers camera and video gear
  • Wire Control enables remote on/off operation
  • 30 day return window for non-working units
  • Universal compatibility suits multiple device types

AT power supply for legacy systems

The myVolts DPS-250AB-44B is an AT-type power supply intended for older NAS units and camera equipment that still rely on the legacy connector standard. It is not suited for modern ATX motherboards or builds requiring current rail distributions.

250 W rated output with single channel

The unit delivers 250 W through a single channel, which covers basic NAS boards and peripheral drives but will run out when multiple high-draw drives or expansion cards are added. Headroom disappears quickly under sustained multi-device loads.

Wire control cable included for remote switching

A wire-control lead ships in the package, letting the operator toggle power remotely without reaching the rear of the chassis. No monitoring software or modular cables are supplied, so integration stays purely manual.

Puncte forte

  • AT form factor fits legacy systems
  • 250 W output powers camera and video gear
  • Wire Control enables remote on/off operation
  • 30 day return window for non-working units
  • Universal compatibility suits multiple device types

Specificații

TypeAT

Întrebări despre acest articol

Will the AT connector on the DPS-250AB-44B fit the power socket on my older camera rig?

The unit uses an AT-type connector, so it will mate with equipment that expects that same interface. Check the pin layout on your device before connecting.

How can I confirm the DPS-250AB-44B is delivering power once installed?

Power the supply and verify that the connected camera or NAS starts normally; the wire-control link should show an active status on the host device.

Does the DPS-250AB-44B package include the wire-control cable and mounting hardware?

The supplier confirms a package is included; the wire-control cable is part of the standard kit. Mounting screws for your chassis are not supplied.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.