Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Rectangular metal power supply unit, silver finish, screw terminals visible

myVolts

myVolts LRS-75-24 75W 24V 3.2A Power Supply

SKU CH-XFXV-EN6H9

Enclosed 75 W switching supply delivering 24 V at 3.2 A with universal 85–264 VAC input, 30 mm low profile, convection cooling and short-circuit, overload and over-voltage protection

  • TypeAT
  • Delivers 75 W at 24 V with 3.2 A output for reliable industrial power
  • Accepts universal 85-264 VAC input and survives 300 VAC surge for 5 seconds
  • Operates up to 70 °C and 5000 m altitude with free-air convection cooling
  • Certified to EN 62368-1, EN 60335-1, EN 61558 and UL 62368-1 safety standards
  • Compact 1U low-profile enclosure with

Industrial 24 V 75 W Power Supply

This myVolts LRS-75-24 delivers a single 24 V output at 3.2 A for industrial automation, mechanical equipment and household appliances. The enclosed unit accepts a universal 85 to 264 VAC input and operates up to 70 °C with free-air convection cooling. A built-in LED shows power-on status and no-load consumption stays below 0.3 W.

DIN-Rail Mounting and Wiring

The 1 U low-profile chassis fits standard DIN rails inside control cabinets, keeping wiring neat in tight spaces. Installers must verify that the AC supply stays within the rated range and that the 300 VAC surge tolerance is not exceeded. Short-circuit, overload and over-voltage protections are internal, so no external protection modules are required for basic compliance.

Pre-Installation Checks

Confirm the load does not exceed 75 W continuous and that the 24 V rail matches the equipment voltage exactly. Ensure the cabinet provides unrestricted airflow for convection cooling at the intended ambient temperature. Check that the installation altitude remains below 5000 metres and that local safety standards accept the declared EN 62368-1, EN 60335-1 and EN 61558 approvals.

Puncte forte

  • Delivers 75 W at 24 V with 3.2 A output for reliable industrial power
  • Accepts universal 85-264 VAC input and survives 300 VAC surge for 5 seconds
  • Operates up to 70 °C and 5000 m altitude with free-air convection cooling
  • Certified to EN 62368-1, EN 60335-1, EN 61558 and UL 62368-1 safety standards
  • Compact 1U low-profile enclosure with

Specificații

TypeAT

Întrebări despre acest articol

How can I confirm the power supply is working after installation?

The LED indicator lights up when the unit receives power and the output delivers 24 V at 3.2 A under load.

What comes in the box and what must I source separately?

The enclosure, terminal block connections and the LED indicator are included; an AC mains cord and mounting screws are not supplied.

Which LRS-75 model should I choose for a 24 V system?

Select the LRS-75-24 variant, which provides 24 V at 3.2 A for 75 W total output.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.