Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Silver aluminium box with DIN rail clip, 75W 24V 3.2A label

myVolts

myVolts NDR-75-24 75W 24V 3.2A DIN rail power supply

SKU CH-YCXV-44J7P MPN NDR-75-24

DIN-rail switching supply delivers 24 V at 3.2 A with 88 % efficiency, 100-240 VAC input and full protection suite

  • TypeAT
  • Global 100-240VAC input works worldwide
  • 88% efficiency cuts heat and energy waste
  • DIN rail TS35/7.5 or 15 mount installs in seconds
  • circuit, overload, over-voltage and overheat protection keeps equipment safe
  • Aluminium alloy housing resists vibration to IEC60068-2-6 standards

Industrial DIN rail power supply

The myVolts NDR-75-24 delivers 75W at 24V with a 3.2A output for PLC and automation equipment. It accepts a universal 100-240VAC input and mounts on standard TS35/7.5 or 15 DIN rails. An 88% efficiency rating and ±1% voltage accuracy support stable operation in control cabinets. Aluminium alloy construction adds durability for industrial environments.

Sustained load behaviour

Constant current limiting activates between 105% and 130% of rated power and auto-recovers when the load normalises. Over-voltage protection shuts down the 24V output at 2933V and restarts automatically after the fault clears. Hold-up time is 60ms at 115VAC and 12ms at 230VAC under full load. These protections maintain supply integrity during prolonged demand.

Thermals noise and power draw

The unit operates from -20°C to 70°C with output derating at higher temperatures. Over-temperature protection shuts the supply down and restarts it once cooled. Insulation withstands 3KVac input-to-output and 2KVac input-to-shell for one minute. Emissions meet EN55022 Class B and EN61000-3-2 harmonic limits, while vibration resistance complies with IEC60068-2-6 at 2G across 10-500Hz.

Puncte forte

  • Global 100-240VAC input works worldwide
  • 88% efficiency cuts heat and energy waste
  • DIN rail TS35/7.5 or 15 mount installs in seconds
  • circuit, overload, over-voltage and overheat protection keeps equipment safe
  • Aluminium alloy housing resists vibration to IEC60068-2-6 standards

Specificații

TypeAT

Întrebări despre acest articol

How much ripple and noise does the NDR-75-24 produce at full load?

The unit delivers 150mV ripple and noise on the 24V output, with an efficiency of 88% under typical conditions.

Which DIN rail profile must I already have to mount this supply?

It clips onto standard TS35/7.5 or TS35/15 rails, so one of those profiles must be present in your enclosure.

Will the NDR-75-24 start reliably on a 115VAC line alongside legacy gear?

At 115VAC the start-up time is 2000ms with a 60ms hold time, and the wide 100-240VAC input range covers most older installations.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.