Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Enclosed metal power supply unit with built-in fan and terminal block outputs

myVolts

myVolts RSP-500-5 500W Power Supply

SKU CH-3D5K-P5VMJ

An enclosed 500 W AC/DC supply with active PFC, remote on-off, sense and DC-OK signals, and forced-air cooling for industrial automation, test gear and laser systems

  • TypeAT
  • 500 W single-output AC/DC supply for industrial equipment
  • Up to 90.5 % efficiency reduces energy waste and heat
  • Active PFC function improves power factor across 85-264 Vac input
  • Built-in DC fan with speed control operates up to 70 °C
  • Remote on-off, remote sense and DC OK signal add design flexibility

Industrial 500 W Enclosed Supply

The myVolts RSP-500-5 is a 500 W single-output enclosed AC/DC power supply built for factory automation, test instruments, laser equipment and burn-in facilities. It delivers a fixed 5 V output at up to 90 A. The unit accepts a universal 85-264 VAC input and includes active power-factor correction.

Verify Voltage, Current and Cooling Space

Confirm that your system requires exactly 5 V DC and can draw up to 90 A continuously. Ensure the enclosure has clearance for forced-air cooling from the built-in DC fan and that the ambient temperature will not exceed 70 °C. Check that your wiring and connectors are rated for the high current this model supplies.

Steady Output at Full Load

Efficiency reaches 90.5 % at 500 W, so waste heat stays manageable during continuous operation. The fan speed adjusts automatically to maintain safe internal temperatures. Protections for short circuit, overload, over-voltage and over-temperature engage without shutting down the supply unless a fault persists, keeping production lines running.

Puncte forte

  • 500 W single-output AC/DC supply for industrial equipment
  • Up to 90.5 % efficiency reduces energy waste and heat
  • Active PFC function improves power factor across 85-264 Vac input
  • Built-in DC fan with speed control operates up to 70 °C
  • Remote on-off, remote sense and DC OK signal add design flexibility

Specificații

TypeAT

Întrebări despre acest articol

Does the RSP-500-5 come with mounting hardware or cables, or must they be purchased separately?

The unit is an enclosed AC/DC supply with a built-in DC fan and screw terminals for input and output; mounting brackets and wiring are not included and must be sourced separately.

The series lists several output voltages — why choose the 5 V model over the 12 V, 24 V or 48 V versions?

The 5 V model delivers 90 A for low-voltage, high-current loads such as factory automation, test instruments or laser systems, while the higher-voltage models provide lower current for different applications.

What does the 500 W rating mean when the supply is installed in a cabinet running at 50 °C ambient?

At up to 70 °C ambient the fan-cooled unit can still deliver the full 500 W, so at 50 °C it operates well within its thermal limit with no derating required.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.