Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Four green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 128GB (4x32GB) DDR5-5600 PC5-44800 2Rx8 CL46 1.1V ECC Registered RDIMM memory upgrade

SKU CH-XGE3-ZW9GH

A 128 GB DDR5-5600 registered ECC kit in four 32 GB modules, tuned to CL46 at 1.1 V for the Supermicro X14SDV-32C-SP3F motherboard

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB 4X32GB

  • 128GB total capacity for memory-intensive server workloads using four 32GB modules
  • DDR5-5600 speed delivers 44800 MT/s data rate for high-throughput applications
  • Registered ECC design with 2Rx8 organisation corrects single-bit errors and stabilises fully populated slots
  • CL46 latency at 1.1V provides efficient timing for the Supermicro X14SDV-32C-SP3F platform
  • 288-pin RDIMM form factor matches the motherboard's required memory architecture exactly

128GB DDR5-5600 ECC RDIMM kit

This 128GB kit contains four 32GB DDR5-5600 Registered ECC RDIMMs built for the Supermicro X14SDV-32C-SP3F motherboard. It delivers 5600 MT/s at CL46 with a 1.1V operating voltage and 2Rx8 organisation. The registered buffer and on-die ECC protect data integrity in fully populated server configurations.

Check motherboard manual before ordering

Verify that your Supermicro X14SDV-32C-SP3F revision supports 128GB total capacity and the approved DIMM population sequence for four 288-pin RDIMMs. Confirm the BIOS recognises 2Rx8 registered modules at DDR5-5600 and that no firmware update is required for full-speed operation. Ensure the chassis provides clearance for standard-height RDIMMs without a heat spreader.

Upgrades from lower-capacity DDR5 RDIMMs

Replacing smaller DDR5 RDIMM kits with this 4x32GB set doubles or quadruples usable memory while keeping the same 5600 MT/s CL46 timing and 1.1V profile. The jump is worth it when workloads exceed current capacity and the board's population rules allow four registered DIMMs. It does not fit systems limited to UDIMM, SODIMM or earlier DDR generations.

Puncte forte

  • 128GB total capacity for memory-intensive server workloads using four 32GB modules
  • DDR5-5600 speed delivers 44800 MT/s data rate for high-throughput applications
  • Registered ECC design with 2Rx8 organisation corrects single-bit errors and stabilises fully populated slots
  • CL46 latency at 1.1V provides efficient timing for the Supermicro X14SDV-32C-SP3F platform
  • 288-pin RDIMM form factor matches the motherboard's required memory architecture exactly

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K4
Capacity128GB (4 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 4X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

What comes in the box and is anything else needed for installation?

The kit includes four 32 GB DDR5-5600 2Rx8 registered ECC RDIMMs, part number MR44800-328K4. No additional parts are required; install them directly into the 288-pin slots following the motherboard manual population order.

Should I choose a different capacity or speed for the Supermicro X14SDV-32C-SP3F?

This 128 GB (4 x 32 GB) kit matches the board's DDR5-5600 PC5-44800 specification, 2Rx8 registered ECC, 1.1 V, CL46. Other capacities or speeds may not be supported or could run at reduced performance.

What does the DDR5-5600 CL46 rating mean once the modules are running in the server?

The memory controller will operate the kit at 5600 MT/s with a CAS latency of 46 cycles at 1.1 V. Registered buffering and ECC keep all four slots stable at full capacity while correcting single-bit errors automatically.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.