NEMIX RAM
NEMIX RAM 128GB (4x32GB) DDR5 6400 CL52 1.1V ECC RDIMM Supermicro H13DSG-OM memory upgrade
A 128 GB registered ECC DDR5 kit of four 32 GB modules running at 6400 MT/s with CL52 latency and 1.1 V, validated for the Supermicro H13DSG-OM motherboard
- Capacity128GB (4 x 32GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 128 GB total capacity across four 32 GB modules
- DDR5 6400 speed with CL52 latency at 1.1 V
- Registered ECC RDIMM architecture prevents data corruption
- Exact-fit 288-pin layout for Supermicro H13DSG-OM
- Lifetime replacement warranty with US-based technical support
128GB DDR5-6400 ECC RDIMM Kit
This 128GB kit contains four 32GB DDR5-6400 registered ECC RDIMMs. Each module runs at 1.1V with CL52 timing in a 2Rx8 configuration. The 288-pin form factor matches the Supermicro H13DSG-OM motherboard requirements exactly. Registered buffering allows full-capacity operation across all populated slots.
Suits Supermicro H13DSG-OM servers only
This memory is validated for the Supermicro H13DSG-OM motherboard and its specific population rules. Builders using UDIMM or SODIMM platforms cannot use these registered DIMMs. Systems requiring non-ECC or unbuffered memory should look elsewhere. Buyers needing different capacities or speeds must verify their board's qualified vendor list first.
2Rx8 registered ECC at 1.1V decides fit
The dual-rank 2Rx8 organization with registered ECC and 1.1V operation is the single specification that determines compatibility. Your server's memory controller expects this exact rank structure and voltage to initialize at DDR5-6400 speed. A different rank count, voltage, or unbuffered design will prevent the system from recognizing the full 128GB capacity or running at the rated frequency.
Puncte forte
- 128 GB total capacity across four 32 GB modules
- DDR5 6400 speed with CL52 latency at 1.1 V
- Registered ECC RDIMM architecture prevents data corruption
- Exact-fit 288-pin layout for Supermicro H13DSG-OM
- Lifetime replacement warranty with US-based technical support
Specificații
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-328K4 |
| Capacity | 128GB (4 x 32GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 128GB 4X32GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Întrebări despre acest articol
Must my Supermicro H13DSG-OM motherboard have all 13 DIMM slots free to install this 4 x 32 GB kit?
The kit occupies four 288-pin RDIMM slots. Check the board manual for the exact population order; you do not need every slot empty, only the four prescribed by the manufacturer.
Can I keep my existing DDR5 RDIMMs and add this 128 GB kit without changing voltage?
Yes, if the installed modules are also 1.1 V DDR5 6400 CL52 2Rx8 Registered ECC. Mixed ranks or timings may force the system to run at the slowest common settings.
How do I verify the kit is running at DDR5 6400 CL52 after installation?
Enter the BIOS or use a tool such as dmidecode and confirm each DIMM shows 6400 MT/s, CL52, 1.1 V, 2Rx8 and ECC Registered status.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
Mushkin Enhanced
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
104,99 USD
0.00133607BTC
În stoc
SK hynix
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)
7,99 USD
0.00010168BTC
În stoc