Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Four green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 128GB (4x32GB) DDR5 6400 ECC RDIMM Supermicro X14SDV-32C-SP3F memory upgrade

SKU CH-KT69-7V9D5

128 GB DDR5 ECC registered RDIMM kit in four 32 GB modules at 6400 MT/s, CL52, 1.1 V for Supermicro X14SDV-32C-SP3F

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 128GB 4X32GB

  • Full 128 GB capacity with 4 x 32 GB modules for maximum slot utilisation
  • DDR5 6400 speed (PC5-51200) matching the board's rated frequency
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors
  • 10 V operating voltage and CL52 latency tuned to the motherboard's memory controller
  • 288-pin RDIMM form factor verified for Supermicro X14SDV-32C-SP3F compatibility

Exact-match DDR5 kit for Supermicro X14SDV-32C-SP3F

This 128GB kit ships as four 32GB DDR5 6400 RDIMMs built to the precise rank, voltage and timing the Supermicro X14SDV-32C-SP3F motherboard expects. Registered ECC architecture lets every slot run fully populated at rated speed while correcting single-bit errors on the fly. The modules arrive new without heat spreaders and install in the board's 288-pin DDR5 slots.

Sustained-load stability with registered ECC

Registered buffering offloads the memory controller so all four slots operate at DDR5 6400 continuously without signal degradation. ECC detects and corrects single-bit errors in real time, preventing silent data corruption during long compute runs. The 1.1V operating voltage and CL52 latency remain stable across full-capacity workloads typical of server deployments.

Upgrade from partial or lower-capacity

The kit replaces mismatched or smaller DIMM sets that force the board to run at reduced speeds or capacities. Populating all channels with identical 2Rx4 modules enables the full 128GB at DDR5 6400 where mixed ranks or voltages would throttle performance. Builders who need more than 128GB or a different form factor such as UDIMM or SODIMM cannot use this kit.

Puncte forte

  • Full 128 GB capacity with 4 x 32 GB modules for maximum slot utilisation
  • DDR5 6400 speed (PC5-51200) matching the board's rated frequency
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors
  • 10 V operating voltage and CL52 latency tuned to the motherboard's memory controller
  • 288-pin RDIMM form factor verified for Supermicro X14SDV-32C-SP3F compatibility

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-324K4
Capacity128GB (4 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 4X32GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Will the 1.1V DDR5 modules run hot or noisy when the server operates continuously?

These DDR5 RDIMMs operate at 1.1V with no heat spreader, relying on chassis airflow; registered buffering reduces electrical load on the memory controller during sustained full-capacity operation.

What motherboard slot type and population rules must the Supermicro X14SDV-32C-SP3F already support for this kit to work?

The board must provide 288-pin DDR5 RDIMM slots and support 2Rx4 registered ECC modules at 6400 MT/s; consult the manual for approved DIMM population order before installing all four 32 GB sticks.

Can I keep existing DDR5 RDIMMs of a different speed or rank installed alongside this 6400 CL52 2Rx4 kit?

Mixing speeds or ranks forces all channels to the slowest common timing; for full 6400 MT/s stability the board should run a matched set of four 2Rx4 CL52 modules.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.