NEMIX RAM
NEMIX RAM 128GB (8x16GB) DDR4 3200 CL22 4Rx4 ECC RDIMM for THINKMATE SBGrid-CryoEM memory upgrade
Eight 16 GB DDR4 3200 CL22 ECC registered RDIMMs totalling 128 GB for Thinkmate SBGrid-CryoEM workstations
- Capacity128GB (8 x 16GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 128 GB total capacity from eight 16 GB modules
- DDR4 3200 speed rated at PC4-25600 bandwidth
- ECC registered design protects data integrity
- Low 1.2 V operation reduces power draw
- 288-pin RDIMM form factor fits ThinkMate SBGrid-CryoEM
128GB DDR4 ECC kit for ThinkMate SBGrid-CryoEM
This 128GB kit contains eight 16GB DDR4 3200 registered DIMMs built for the ThinkMate SBGrid-CryoEM workstation. Each module runs at 1.20V with CL22 latency and provides ECC error correction for data integrity. The registered design reduces electrical load on the memory controller in multi-DIMM configurations. It targets IT professionals who need validated, high-capacity memory for cryo-EM workloads.
288-pin RDIMM with major OEM chips
Modules use 288-pin DDR4 RDIMM form factor without heat spreaders, relying on chassis airflow for cooling. Chips are sourced from major OEM suppliers such as Samsung, Micron or Hynix. The registered buffer and 4Rx4 organisation support dense population across all eight slots. Every unit undergoes stress testing under load before shipment to verify stability in mission-critical environments.
Verify eight-slot support
Confirm the workstation motherboard accepts eight registered DDR4 DIMMs and supports the 4Rx4 rank structure. Unbuffered or non-ECC modules will not function in this platform. Check the system manual for maximum per-slot and total capacity limits before ordering. Ensure the BIOS is current to recognise the full 128GB kit.
Puncte forte
- 128 GB total capacity from eight 16 GB modules
- DDR4 3200 speed rated at PC4-25600 bandwidth
- ECC registered design protects data integrity
- Low 1.2 V operation reduces power draw
- 288-pin RDIMM form factor fits ThinkMate SBGrid-CryoEM
Specificații
| Brand | NEMIX RAM |
|---|---|
| Series | THINKMATE Server/Workstation Compatible Series Memory |
| Model | THINKMATE DDR4 3200MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR25600-628K8 |
| Capacity | 128GB (8 x 16GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | THINKMATE |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 2Rx8 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 128GB (8X16GB) DDR4 3200MHZ PC4-25600 4Rx4 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT |
Întrebări despre acest articol
What speed and latency does this DDR4 kit run at, and what throughput ceiling does that set?
The eight 16 GB modules operate at DDR4 3200 with CL22 timing, matching the PC4-25600 data-rate specification for registered server memory.
What physical slot and form factor does this memory require to fit the workstation?
Each module uses the standard 288-pin DDR4 RDIMM form factor, so the THINKMATE SBGrid-CryoEM must provide eight registered DIMM slots.
How are these registered ECC modules installed, and what step is often missed?
Power down, open the chassis, align each 288-pin RDIMM with its slot and press firmly until the ejectors lock; the step many skip is verifying in BIOS that all eight modules are detected at 3200 MHz with ECC active.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.



