BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.0027802BTC
În stoc
NEMIX RAM
NEMIX RAM 128GB (8x16GB) DDR4 3200 CL22 UDIMM for THINKMATE VSX-R5-540X1
Eight 16 GB DDR4 3200 CL22 unbuffered UDIMMs totalling 128 GB at 1.2 V for the Thinkmate VSX-R5-540X1 workstation
- Capacity128GB (8 x 16GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 128 GB total capacity across 8 modules for large workloads
- DDR4 3200 speed with CL22 latency for responsive performance
- 2 V operation keeps power draw low
- 288-pin UDIMM form factor fits compatible Thinkmate workstations
- 2Rx8 dual-rank organisation maximises density per slot
Thinkmate VSX-R5-540X1 compatible memory kit
This 128GB kit contains eight 16GB DDR4 UDIMMs built for the Thinkmate VSX-R5-540X1 workstation. The modules run at 3200MHz with CL22 latency and operate at 1.20V. They are non-ECC unbuffered DIMMs using major OEM chips from Samsung, Micron or Hynix. The kit provides a straightforward capacity upgrade for that specific platform.
Thermals noise and power draw in normal use
Each module draws 1.20V and carries no heat spreader, relying on case airflow for cooling. The unbuffered design keeps the electrical load on the memory controller low during typical workloads. Power consumption scales with the eight populated slots, so adequate chassis ventilation helps maintain stable temperatures. No active cooling components are included on the sticks themselves.
Build fit what it needs and what it frees
The 288-pin DDR4 form factor fits standard UDIMM slots on the target workstation motherboard. Populating all eight channels maximises the platform's memory bandwidth without requiring registered or ECC modules. The kit leaves no spare slots for further expansion, so the full 128GB is available immediately. Compatibility is validated for the Thinkmate VSX-R5-540X1 system.
Puncte forte
- 128 GB total capacity across 8 modules for large workloads
- DDR4 3200 speed with CL22 latency for responsive performance
- 2 V operation keeps power draw low
- 288-pin UDIMM form factor fits compatible Thinkmate workstations
- 2Rx8 dual-rank organisation maximises density per slot
Specificații
| Brand | NEMIX RAM |
|---|---|
| Series | THINKMATE Server/Workstation Compatible Series Memory |
| Model | THINKMATE DDR4 3200MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD25600-628K8 |
| Capacity | 128GB (8 x 16GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | THINKMATE |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 128GB (8X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT |
Întrebări despre acest articol
How do I install the 288-pin DDR4 UDIMM modules in the ThinkMate VSX-R5-540X1, and which step is often missed?
Power off and unplug the workstation, open the chassis, align each module's notch with the slot key, press firmly until both retention clips click, then verify all eight 16 GB sticks are seated before closing the case.
What maintenance or replacement will the 128 GB DDR4 3200 kit need over its service life?
The modules have no heat spreaders and carry a lifetime replacement warranty; only occasional dust removal from the slots is required unless a stick fails, in which case the warranty covers replacement.
What limit appears first when the 2Rx8 CL22 1.20 V memory runs sustained workloads on the VSX-R5-540X1?
The CAS latency of 22 cycles at 3200 MT/s sets the primary timing bottleneck before thermal throttling becomes a factor on these unbuffered, non-ECC UDIMMs.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
