Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green rectangular DDR5 memory module with gold contacts, no heat spreader, 288 pins, 128GB capacity

NEMIX RAM

NEMIX RAM 128GB DDR5 4800 CL40 2Rx4 ECC RDIMM Supermicro H13SSL-NT memory upgrade

SKU CH-46CJ-JD7E5

128 GB DDR5 4800 CL40 2Rx4 registered ECC RDIMM built for the Supermicro H13SSL-NT motherboard

  • Capacity128GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 128GB

Vedeți celelalte 24 configurații
  • 128 GB exact-fit upgrade for Supermicro H13SSL-NT
  • DDR5 4800 speed with CL40 latency runs at rated performance
  • Registered ECC architecture corrects single-bit errors automatically
  • 2Rx4 1.1 V modules populate every slot at full capacity
  • Lifetime replacement warranty with free US-based technical support

128 GB DDR5 RDIMM for Supermicro H13SSL-NT

This 128 GB DDR5 4800 RDIMM is a server-grade memory upgrade built to the exact rank, voltage and timing the Supermicro H13SSL-NT motherboard expects. It uses a 288-pin registered ECC design with CL40 latency and 1.1 V operation so the system recognises the full capacity and runs at its rated speed without manual tuning.

Suited for administrators populating approved

IT teams expanding memory in a validated Supermicro H13SSL-NT configuration will find the registered architecture and ECC protection match the board's population rules. Buyers who need a different capacity, a non-ECC module, a UDIMM or SODIMM form factor, or a speed grade other than DDR5 4800 should look at other parts.

Registered ECC with 2Rx4 organisation decides fit

The single specification that determines compatibility is the 2Rx4 registered ECC organisation combined with 1.1 V DDR5 4800 timing; only modules matching this exact profile will be accepted by the H13SSL-NT memory controller at full capacity and rated frequency.

Puncte forte

  • 128 GB exact-fit upgrade for Supermicro H13SSL-NT
  • DDR5 4800 speed with CL40 latency runs at rated performance
  • Registered ECC architecture corrects single-bit errors automatically
  • 2Rx4 1.1 V modules populate every slot at full capacity
  • Lifetime replacement warranty with free US-based technical support

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-724K1
Capacity128GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Will the 288-pin DDR5 RDIMM fit the Supermicro H13SSL-NT DIMM slots?

Yes, the module uses the exact 288-pin Registered DDR5 form factor required by the H13SSL-NT, so it seats directly in the board's DDR5 RDIMM slots without adapters.

What is the correct installation order when populating all channels on the H13SSL-NT?

Follow the motherboard manual's population sequence — typically fill the primary slot of each channel first, then add the second slot per channel, ensuring the 2Rx4 registered DIMMs are installed in the approved order for full 128GB recognition.

Does the 1.1V DDR5 RDIMM require any firmware update or ongoing maintenance on the H13SSL-NT?

No scheduled maintenance is needed; the module runs at the standard 1.1V DDR5 voltage and relies on the board's memory controller for ECC scrubbing, so only a BIOS update per Supermicro's release notes may improve compatibility.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.