NEMIX RAM
NEMIX RAM 128GB DDR5 5600 ECC RDIMM SuperMicro B13DEE memory upgrade
A 128 GB DDR5 registered ECC module running at 5600 MT/s with CL46 latency and 1.1 V operation for SuperMicro B13DEE servers
- Capacity128GB
- SpeedDDR5 5600 (PC5 44800)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 128 GB capacity scales memory-heavy workloads
- DDR5 5600 speed feeds data to CPU fast
- ECC registered design corrects errors automatically
- 1 V operation keeps power draw low
- Validated for SuperMicro B13DEE motherboard
128 GB DDR5 5600 ECC RDIMM for SuperMicro B13DEE
This registered DIMM delivers 128 GB of DDR5 5600 memory with ECC and a CL46 latency. It is built for the SuperMicro B13DEE motherboard in server and workstation deployments. The single-module kit suits administrators expanding capacity in compatible platforms.
Thermals noise and power at 1.1 V
Operating at 1.10 V, the module runs within standard DDR5 server power limits without a heat spreader. Registered buffering reduces electrical load on the memory controller during sustained workloads. Passive cooling in a chassis with adequate airflow keeps temperatures stable.
4Rx4 organisation decides fit
The 4Rx4 rank configuration determines whether the motherboard can address the full 128 GB in a single slot. Systems limited to lower rank counts will not recognise the module. Verify the B13DEE memory population rules before purchase.
Puncte forte
- 128 GB capacity scales memory-heavy workloads
- DDR5 5600 speed feeds data to CPU fast
- ECC registered design corrects errors automatically
- 1 V operation keeps power draw low
- Validated for SuperMicro B13DEE motherboard
Specificații
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | Supermicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR44800-744K1 |
| Capacity | 128GB |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-PIN DDR5 RDIMM |
| Rank | 4Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 128GB (1X128GB) DDR5 5600MHZ PC5-44800 4Rx4 1.1V CL46 288-PIN ECC RDIMM Registered Server Memory |
Întrebări despre acest articol
How do I install the 288-pin DDR5 RDIMM in the SuperMicro B13DEE, and what step is often missed?
Power off the server, open the chassis, align the notch on the 288-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that the 128GB module is detected at 5600 MT/s with ECC active.
What maintenance or replacement will this 4Rx4 registered ECC module need over its service life?
No scheduled maintenance is required; the module has no heat spreader, so keep server airflow clean, and rely on ECC to correct single-bit errors — replace only if the system logs uncorrectable errors or the module fails POST.
What limit appears first when this 1.1V CL46 kit runs sustained workloads on the B13DEE?
The CAS latency of CL46 at 5600 MT/s sets the timing ceiling, while the 1.1V operating voltage and 4Rx4 density constrain thermal headroom before any frequency throttling occurs.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.



