Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green printed circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 128GB DDR5 6400 CL52 2Rx4 1.1V ECC Registered RDIMM Supermicro H14SSL-N memory upgrade

SKU CH-3XG1-EEZNS

128 GB DDR5-6400 ECC registered RDIMM, CL52 1.1 V 2Rx4, validated for Supermicro H14SSL-N motherboards

  • Capacity128GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 128GB

Vedeți celelalte 24 configurații
  • Exact-match upgrade runs at rated 6400 speed with CL52 timing
  • 128 GB capacity fills one 288-pin RDIMM slot on the H14SSL-N
  • Registered ECC architecture offloads the controller and corrects single-bit errors
  • 2Rx4 rank and 1.10 V spec match the board's memory-population rules
  • Major OEM Samsung Micron Hynix chips deliver enterprise-grade stability

Exact-match DDR5 upgrade for Supermicro H14SSL-N

This 128 GB DDR5-6400 registered ECC RDIMM is built to the precise rank, voltage and timing the Supermicro H14SSL-N motherboard expects. The 2Rx4 organisation and 1.10 V operation let the board recognise the full capacity at rated speed without manual tuning. Buyers using consumer UDIMM or SODIMM modules will find they do not fit the 288-pin registered slots this platform requires.

Sustained-load behaviour with registered ECC

Registered architecture buffers every address and command, so the memory controller stays stable when all channels are fully populated at 6400 MT/s. ECC corrects single-bit errors on the fly, preventing silent data corruption that would otherwise crash production workloads. Systems that omit registered buffering or ECC cannot maintain the same uptime under continuous enterprise demand.

CL52 latency at 1.10 V decides fit

The module runs at CAS latency 52 with a standard 1.10 V supply, matching the board's JEDEC profile exactly. If your configuration requires a different latency or voltage, this DIMM will not meet the memory controller's training parameters. Always verify the motherboard manual for supported DIMM population order before installation.

Puncte forte

  • Exact-match upgrade runs at rated 6400 speed with CL52 timing
  • 128 GB capacity fills one 288-pin RDIMM slot on the H14SSL-N
  • Registered ECC architecture offloads the controller and corrects single-bit errors
  • 2Rx4 rank and 1.10 V spec match the board's memory-population rules
  • Major OEM Samsung Micron Hynix chips deliver enterprise-grade stability

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-724K1
Capacity128GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

How much heat does this 1.1V DDR5 RDIMM add when the server runs 24/7?

At 1.10V the module draws minimal power, and the registered architecture reduces electrical load on the memory controller, keeping thermal output low even in fully populated configurations.

What motherboard slot and population rules must my Supermicro H14SSL-N already have for this 288-pin RDIMM to work?

The board needs 288-pin DDR5 RDIMM slots and must support 2Rx4 registered ECC modules at 6400 speed; consult the manual for approved population order and maximum capacity per channel.

Can I mix this 2Rx4 CL52 kit with existing DDR5 RDIMMs of different rank or latency in the same H14SSL-N?

Mixing ranks or timings is not recommended; the memory controller will downclock all modules to the slowest common settings, and population rules may prevent full capacity recognition.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.