BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00278038BTC
În stoc
NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR3 1333 SODIMM memory upgrade for POSIFLEX HC-1021
A 16 GB DDR3 SODIMM kit for the POSIFLEX HC-1021 touch-screen terminal
- Capacity16GB (2 x 8GB)
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- 16 GB kit for POSIFLEX HC-1021 terminal
- DDR3 1333 speed matches system spec
- 2Rx8 dual-rank layout for density
- 35 V low-voltage operation saves power
- 204-pin SODIMM fits POSIFLEX slot
POSIFLEX HC-1021 memory kit
This 16 GB DDR3 SODIMM kit is built for the POSIFLEX HC-1021 21.5 inch touch-screen infotainment terminal. It targets administrators who need to maximise the memory capacity of that specific point-of-sale platform. The modules are tested for compatibility with the designated system.
Dual 8 GB modules at DDR3 1333
Two 8 GB modules provide 16 GB total capacity running at 1333 MHz (PC3-10600) with CL9 latency. The 2Rx8 organisation and 1.35 V operation suit the terminal's memory controller. Non-ECC unbuffered design means error correction and registered buffering are not available.
204-pin SODIMM form factor for the HC-1021
The 204-pin DDR3 SODIMM format fits the memory slots of the POSIFLEX HC-1021 without adapters. No heat spreader is included, keeping the module height low for the compact chassis. This kit does not support systems that require ECC, registered modules or a different DDR generation.
Puncte forte
- 16 GB kit for POSIFLEX HC-1021 terminal
- DDR3 1333 speed matches system spec
- 2Rx8 dual-rank layout for density
- 35 V low-voltage operation saves power
- 204-pin SODIMM fits POSIFLEX slot
Specificații
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-828K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM KIT |
Întrebări despre acest articol
Will the 16GB (2x8GB) DDR3 1333 kit run alongside the original memory already in my POSIFLEX HC-1021?
The kit is built to the POSIFLEX POS specification — 204-pin DDR3 SODIMM, 1333 MT/s, CL9, 1.50 V unbuffered non-ECC — so it matches the factory memory electricals and timing; install it in the free slots and the system will train at the common speed.
How can I confirm the 16GB kit is operating at the rated 1333 MT/s and CL9 after installation?
Open Task Manager → Performance → Memory or run CPU-Z; both will show 1333 MT/s (PC3-10600) and CAS 9 when the modules are seated correctly.
What exactly ships in the box and is anything else required to finish the upgrade?
The package contains the two 8 GB 204-pin DDR3 SODIMM modules only; no tools, cables or software are included or needed for installation.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
