Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR3 1600 ECC UDIMM 1.35V 240-pin memory upgrade

SKU CH-B03G-C65SN

16 GB dual-channel DDR3-1600 ECC UDIMM kit at 1.35 V for Synology NAS upgrades

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1600 (PC3 12800)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.35V
  • ECC protection guards data integrity in NAS workloads
  • 35V low voltage cuts power draw and heat
  • 1600MHz DDR3 speed matches Synology RAMEC1600DDR3-8GBX2 spec
  • 2Rx8 dual-rank layout fills two 240-pin slots with 16GB
  • Major-brand Samsung, Micron or Hynix chips ensure stable operation

Synology NAS DDR3 ECC kit

This 16 GB kit contains two 8 GB DDR3 1600 modules built for Synology NAS units. Each stick is an unbuffered ECC UDIMM that runs at 1.35 V. The modules use major OEM chips and are tested for stability in network-attached storage workloads.

DDR3 1600 platform ceiling

DDR3 1600 tops out at PC3-12800 bandwidth and CL11 latency on this voltage. The 240-pin UDIMM form factor fits only boards wired for DDR3 ECC unbuffered memory. Systems that require registered DIMMs or a different DDR generation cannot use these modules.

2Rx8 rank per module

Each 8 GB module is organised as 2Rx8, a density that the target NAS memory controller must support. If the system documentation calls for 1Rx8 or 4Rx8 ranks, this kit will not be recognised. Check the rank requirement before ordering.

Puncte forte

  • ECC protection guards data integrity in NAS workloads
  • 35V low voltage cuts power draw and heat
  • 1600MHz DDR3 speed matches Synology RAMEC1600DDR3-8GBX2 spec
  • 2Rx8 dual-rank layout fills two 240-pin slots with 16GB
  • Major-brand Samsung, Micron or Hynix chips ensure stable operation

Specificații

BrandNEMIX RAM
SeriesSynology Compatible Series NAS Memory
ModelSynology DDR3 1600MHZ ECC Unbuffered UDIMM NAS Memory
Part NumberME12800-828K2
Capacity16GB (2 x 8GB)
SpeedDDR3 1600 (PC3 12800)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.35V
Compatible SystemSynology
CAS LatencyCL11
Heat SpreaderNo
Type240-Pin DDR3 ECC UDIMM
Rank2Rx8
FeaturesDDR3 1600MHZ ECC UDIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR3 1600MHZ PC3-12800 2Rx8 1.35V 240-PIN ECC Unbuffered UDIMM KIT

Întrebări despre acest articol

Should I choose the 2 x 8 GB kit or a single 16 GB module for my Synology NAS?

The kit provides two matched 8 GB modules for dual-channel operation, which Synology NAS units typically require for full bandwidth and ECC integrity.

What does the 1600 MHz speed mean once installed in a Synology NAS?

The modules run at DDR3 1600 (PC3-12800) with CL11 latency, delivering the rated throughput the NAS memory controller expects for ECC error correction.

Does the 240-pin DDR3 ECC UDIMM interface limit capacity or speed in practice?

The 240-pin DDR3 ECC UDIMM form factor caps each slot at 8 GB and the bus at 1600 MHz, so this 16 GB kit uses two slots at the maximum supported frequency.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.