Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Two green DDR4 RDIMM sticks, no heat spreaders, 288-pin, 16 GB kit

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 2933 CL21 ECC RDIMM Dell Precision 5820 memory upgrade

SKU CH-HV6E-TE652

16 GB dual-channel DDR4 ECC registered DIMM kit running at 2933 MHz with CL21 latency for Dell Precision 5820 workstations

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 2933 (PC4 23400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB dual-channel kit expands workstation memory
  • ECC registered design protects data integrity in critical tasks
  • DDR4 2933 CL21 speed matches Dell Precision 5820 specifications
  • 2 V low-voltage operation reduces power draw
  • 288-pin RDIMM form factor ensures direct compatibility

Dell Precision 5820 ECC RDIMM kit

This 16GB kit contains two 8GB DDR4 2933 registered DIMMs built for the Dell Precision 5820 tower workstation. ECC and registered buffering provide the error correction and signal integrity required in professional workloads.

288-pin registered modules without heat spreaders

The 288-pin RDIMM form factor fits the workstation's DDR4 slots directly. Operating at 1.2V with CL21 latency, the modules use major OEM chips from Samsung, Micron or Hynix and leave the top surface exposed for dense slot populations.

DDR4 2933 registered ECC limits

Registered ECC memory only functions on platforms that support buffered DIMMs and ECC; consumer motherboards and standard desktop CPUs cannot use these modules. The kit is validated for the specified Dell system and cannot be used in non-ECC or unbuffered configurations.

Puncte forte

  • 16 GB dual-channel kit expands workstation memory
  • ECC registered design protects data integrity in critical tasks
  • DDR4 2933 CL21 speed matches Dell Precision 5820 specifications
  • 2 V low-voltage operation reduces power draw
  • 288-pin RDIMM form factor ensures direct compatibility

Specificații

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR4 2933MHZ RDIMM Registered Server Memory
Part NumberMR23400-818K2
Capacity16GB (2 x 8GB)
SpeedDDR4 2933 (PC4 23400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemDell
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (2X8GB) DDR4 2933MHZ PC4-23400 1Rx8 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory KIT

Întrebări despre acest articol

Does the DDR4 2933 (PC4-23400) interface limit the kit to 2933 MT/s in a Precision 5820?

Yes, the kit is rated for DDR4 2933 (PC4-23400) and will run at up to 2933 MT/s in the Precision 5820 tower.

What physical slot and clearance do the 288-pin RDIMM modules need?

Each 288-pin DDR4 RDIMM requires a standard DDR4 DIMM slot; the modules have no heat spreader so they fit under standard CPU coolers.

How are the two 8 GB modules installed and which step is often missed?

Power off, open the case, align each module's notch with the slot key, press firmly until both retention clips click, then enable ECC in the BIOS if it is not automatic.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.