Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green circuit board with black memory chips and gold edge contacts

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 2Rx8 260-Pin SODIMM POSIFLEX JK-3250 memory upgrade

SKU CH-0YQC-DD6C9

16 GB DDR4 3200 SODIMM for POSIFLEX JK-3250 kiosks, CL22 2Rx8 1.2 V unbuffered non-ECC

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB DDR4 3200 MHz boosts kiosk responsiveness
  • CL22 latency at 1.20 V keeps power draw low
  • 2Rx8 dual-rank layout maximises memory density
  • 260-pin SODIMM fits POSIFLEX JK-3250 Cachet Series
  • Tested with Samsung Micron Hynix chips for stability

POSIFLEX JK-3250 kiosk upgrade

This 16 GB DDR4 SODIMM is built for the POSIFLEX JK-3250 Cachet Series point-of-sale terminal. It targets IT teams maintaining kiosk fleets who need a validated, single-module memory increase without opening a full workstation chassis.

Unbuffered SODIMM with major-brand DRAM

The stick uses Samsung, Micron or Hynix chips on a standard 260-pin green PCB without a heat spreader, keeping height low for tight kiosk enclosures. Unbuffered, non-ECC operation matches the platform's consumer-class memory controller, and the 1.2 V rating means no extra voltage configuration in BIOS.

3200 MT/s CL22 2Rx8 density

Rated at PC4-25600 with CAS 22, the dual-rank 2Rx8 organisation delivers the bandwidth the JK-3250 expects from a single 16 GB module. Systems requiring ECC, registered signalling or speeds beyond 3200 MT/s cannot use this part.

Puncte forte

  • 16 GB DDR4 3200 MHz boosts kiosk responsiveness
  • CL22 latency at 1.20 V keeps power draw low
  • 2Rx8 dual-rank layout maximises memory density
  • 260-pin SODIMM fits POSIFLEX JK-3250 Cachet Series
  • Tested with Samsung Micron Hynix chips for stability

Specificații

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

Întrebări despre acest articol

Does the DDR4 3200 (PC4-25600) interface run at 3200 MT/s or drop to a lower speed in the POSIFLEX JK-3250?

The module is rated DDR4 3200 (PC4-25600); the JK-3250 memory controller will set the final speed, often 3200 MT/s if the BIOS supports it.

Will this 260-pin SODIMM fit the POSIFLEX JK-3250 Cachet Series kiosk slot?

Yes, it is a 260-pin DDR4 SODIMM built to the POSIFLEX POS series form factor for the JK-3250.

How do I install the module and what step is commonly missed?

Power off, open the kiosk chassis, align the notch on the 260-pin edge, press firmly until both side clips click, then verify 16 GB appears in BIOS.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.