NEMIX RAM
NEMIX RAM 16GB DDR4 3200 CL22 ECC RDIMM Samsung M393A2K43DB2-CWE memory upgrade
16 GB DDR4 3200 ECC registered DIMM, 2Rx8 CL22 1.2 V 288-pin, Samsung M393A2K43DB2-CWE compatible
- Capacity16GB
- SpeedDDR4 3200 (PC4 25600)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB DDR4 3200 MHz for faster server throughput
- ECC registered design protects data integrity under load
- CL22 CAS latency keeps timing tight at speed
- 2 V operation reduces power draw per module
- 288-pin RDIMM form factor fits standard server slots
Samsung Server Memory Upgrade
This 16 GB DDR4 3200 ECC RDIMM module is built for Samsung servers and workstations that require registered memory with error correction. It runs at PC4-25600 speed with a CL22 latency and 1.2 V operation. The 2Rx8 organisation uses major OEM Samsung, Micron or Hynix chips on a standard 288-pin form factor.
Suited For ECC Workloads
The module targets IT professionals managing mission-critical Samsung platforms where data integrity and stability under load are required. Systems that do not support registered ECC DIMMs, or builds that need unbuffered memory, should select a different memory type.
Check Platform Compatibility
Verify that the target system accepts 288-pin DDR4 RDIMMs with 2Rx8 organisation and CL22 timing at 3200 MT/s. Confirm the motherboard or server manual lists registered ECC support and that the voltage requirement matches 1.2 V. Ensure the memory slot population rules allow a single 16 GB module in the desired channel configuration.
Puncte forte
- 16 GB DDR4 3200 MHz for faster server throughput
- ECC registered design protects data integrity under load
- CL22 CAS latency keeps timing tight at speed
- 2 V operation reduces power draw per module
- 288-pin RDIMM form factor fits standard server slots
Specificații
| Brand | NEMIX RAM |
|---|---|
| Series | Samsung Server/Workstation Compatible Series Memory |
| Model | Samsung DDR4 3200MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR25600-628K1 |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Samsung |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 2Rx8 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory |
Întrebări despre acest articol
What type of motherboard slot is required for this 288-PIN DDR4 RDIMM?
This module fits a 288-PIN DDR4 RDIMM slot on a motherboard that supports registered ECC memory and runs at 1.20V.
Will this CL22 registered ECC module run correctly if I keep older registered ECC DIMMs of the same voltage installed?
Yes, provided the older DIMMs are also DDR4 registered ECC at 1.20V, the system will operate at the slowest common speed and latency.
How can I verify the module is recognised at 3200 MT/s with ECC active after installation?
Check the BIOS memory information or use a tool such as dmidecode to confirm 3200 MT/s speed, CL22 timings and ECC enabled status.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.



