Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

NEMIX RAM

NEMIX RAM 16GB DDR5 5600 PC5-44800 CL46 1Rx8 ECC SODIMM

SKU CH-D0SR-W5ETQ

16GB DDR5 5600 ECC SODIMM adds error-correcting memory for servers and workstations

  • Capacity16GB
  • SpeedDDR5 5600 (PC5 44800)
  • CAS Latency46
  • Voltage1.1V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protection guards data integrity in critical workloads
  • 5600 MT/s DDR5 speed accelerates server responsiveness
  • 1 V operation reduces platform power draw
  • 1Rx8 single-rank layout enables higher density configurations
  • 262-pin SODIMM form factor fits compact server chassis

16GB DDR5 5600 ECC SODIMM

This 16GB DDR5 5600 module delivers PC5-44800 bandwidth with CL46 latency at 1.1V. It uses a 1Rx8 unbuffered ECC design on a 262-pin SODIMM form factor. The memory is built with major OEM chips from Samsung, Micron or Hynix and carries a NEMIX RAM lifetime replacement warranty. It targets servers and workstations that require error-correcting memory in a compact slot.

Suited for DDR5 5600 ECC SODIMM slots

This module fits systems that accept unbuffered DDR5 5600 ECC SODIMMs with 1Rx8 organisation. It is not suitable for platforms that require registered or load-reduced DIMMs, nor for boards limited to non-ECC memory. Buyers needing higher capacity per slot or lower CAS latency should look at other configurations.

PC5-44800 speed grade decides fit

The single specification that determines compatibility is the PC5-44800 speed rating paired with CL46 timing at 1.1V. The memory controller must support this exact data rate and voltage for stable operation. Verify the platform qualification list before purchase.

Puncte forte

  • ECC protection guards data integrity in critical workloads
  • 5600 MT/s DDR5 speed accelerates server responsiveness
  • 1 V operation reduces platform power draw
  • 1Rx8 single-rank layout enables higher density configurations
  • 262-pin SODIMM form factor fits compact server chassis

Specificații

BrandNEMIX RAM
ModelPart#: MSE44800-618K1-MTC10C1084S1TC56BR-V27
Part NumberPart#: MSE44800-618K1-MTC10C1084S1TC56BR-V27
Capacity16GB
SpeedDDR5 5600 (PC5 44800)
CAS Latency46
Voltage1.1V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix

Întrebări despre acest articol

Will this 5600MHz DDR5 SODIMM downclock to work in a system that only supports 4800MHz?

DDR5 modules negotiate speed with the memory controller, so a 5600MHz stick will operate at the highest speed the platform allows, including 4800MHz if that is the limit.

How can I confirm the ECC function is active after installing the 1Rx8 module?

Check the BIOS memory information screen for ECC status or run a memory diagnostic tool that reports error-correction capability on the installed 16GB stick.

Does the 262-pin unbuffered SODIMM ship alone or with extra parts?

The package contains the single 16GB DDR5 5600 CL46 1.1V ECC SODIMM only; no cables, brackets or additional memory modules are included.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.