Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 16GB DDR5 5600MHz CL46 1Rx8 1.1V ECC Registered RDIMM 288-Pin Memory Upgrade

SKU CH-KPCJ-E9DE7

16 GB DDR5-5600 registered ECC RDIMM at CL46 and 1.1 V for GIGABYTE MZ33-CP1 servers

  • Capacity16GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 16GB

Vedeți celelalte 24 configurații
  • Registered ECC design corrects single-bit errors on the fly preventing silent data corruption
  • DDR5 5600 speed with CL46 latency delivers rated throughput for server workloads
  • 1V operation matches the memory controller specification for stable full-capacity recognition
  • 1Rx8 single-rank layout enables full-slot population on the GIGABYTE MZ33-CP1 motherboard
  • 288-pin RDIMM form factor fits the required registered DIMM slots without adapters

Exact-match DDR5-5600 ECC RDIMM

This NEMIX RAM module provides 16 GB of DDR5-5600 registered ECC memory in a 288-pin RDIMM form factor. It is built to the precise 1Rx8 rank, 1.1 V voltage and CL46 timing that the GIGABYTE MZ33-CP1 motherboard expects for full-capacity recognition and rated-speed operation.

Suited for single-DIMM server upgrades

System administrators expanding a compatible GIGABYTE MZ33-CP1 platform with a single registered ECC DIMM will meet the board's population rules. Buyers who need unbuffered UDIMM or SODIMM modules, or who require a different capacity, speed or voltage, should look elsewhere.

Straightforward slot installation

Align the 288-pin RDIMM with the motherboard's DDR5 slot, press evenly until the retention clips engage, then verify the module is recognised at 5600 MT/s in the BIOS. The most common issue is mixing registered and unbuffered DIMMs or populating slots in an order the board's manual does not support.

Puncte forte

  • Registered ECC design corrects single-bit errors on the fly preventing silent data corruption
  • DDR5 5600 speed with CL46 latency delivers rated throughput for server workloads
  • 1V operation matches the memory controller specification for stable full-capacity recognition
  • 1Rx8 single-rank layout enables full-slot population on the GIGABYTE MZ33-CP1 motherboard
  • 288-pin RDIMM form factor fits the required registered DIMM slots without adapters

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K1
Capacity16GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Does my motherboard need to support DDR5 5600 RDIMM slots for this 288-pin module to function?

Yes, the board must accept DDR5 5600 Registered DIMMs; the GIGABYTE MZ33-CP1 is validated for this 16 GB 1Rx8 CL46 1.10 V kit.

Can I install this Registered ECC RDIMM alongside older unbuffered DIMMs in the same server?

No, Registered and unbuffered DIMMs cannot be mixed on the same memory controller; populate all slots with matching Registered ECC modules.

How can I confirm the module is running at 5600 MT/s with CL46 after installation?

Check the BIOS memory information or OS tools such as dmidecode; they should report 5600 MT/s, PC5-44800, 1Rx8 Registered ECC at 1.10 V.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.