Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Two green DDR5 RDIMM modules with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 192GB (2x96GB) DDR5 5600 ECC RDIMM CL46 2Rx4 1.1V Supermicro X14SDV-36CE-SP3F memory upgrade

SKU CH-Q5Y0-QPZ6R

A 192 GB DDR5 kit of two 96 GB registered ECC RDIMMs running at 5600 MHz with CL46 timing and 1.1 V for the Supermicro X14SDV-36CE-SP3F motherboard

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

  • 192 GB total capacity from a matched 2 x 96 GB kit
  • DDR5 5600 speed with CL46 latency for rated server performance
  • Registered ECC architecture offloads the controller and corrects single-bit errors
  • 1 V operation matches the motherboard's voltage requirement exactly
  • 288-pin RDIMM form factor fits the Supermicro X14SDV-36CE-SP3F memory slots

Exact-fit DDR5 RDIMM kit for Supermicro

This 192GB kit contains two 96GB DDR5 5600 modules built to the 288-pin RDIMM form factor the board requires. Registered ECC architecture ensures each slot is recognised at full capacity and runs at its rated speed. The 2Rx4 rank configuration matches the memory controller expectations for stable population.

Sustained enterprise stability

Registered buffering offloads the memory controller so every slot stays fully populated under continuous load. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots during production workloads. The 1.1V operating voltage keeps power draw consistent across long operating periods.

2Rx4 rank and 1.1V spec decide compatibility

The motherboard's memory-population rules require this exact rank structure and voltage for full-capacity recognition. A different rank or voltage will cause the system to reject the modules or run them at reduced speeds. Verify your manual for approved DIMM population order before installation.

Puncte forte

  • 192 GB total capacity from a matched 2 x 96 GB kit
  • DDR5 5600 speed with CL46 latency for rated server performance
  • Registered ECC architecture offloads the controller and corrects single-bit errors
  • 1 V operation matches the motherboard's voltage requirement exactly
  • 288-pin RDIMM form factor fits the Supermicro X14SDV-36CE-SP3F memory slots

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Will the 1.10V DDR5 5600 modules add noticeable heat or power draw when the server runs all day?

The kit operates at the standard DDR5 1.10V level and uses registered ECC RDIMMs that offload the memory controller, so heat and power stay within normal server limits for continuous operation.

What must the motherboard provide for these 288-pin RDIMMs to function?

The Supermicro X14SDV-36CE-SP3F must support DDR5 5600 registered ECC memory with 2Rx4 organisation and 1.1V operation, plus follow its documented DIMM population order for two 96GB modules.

Can the 2Rx4 registered ECC design work alongside other DDR5 RDIMMs already installed in the same server?

Mixing is only reliable when the existing modules match the same DDR5 5600 speed, 2Rx4 rank, registered ECC type and 1.1V voltage, and the motherboard manual approves the combined population.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.