BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00277815BTC
În stoc
NEMIX RAM
NEMIX RAM 192GB (4x48GB) DDR5 5600 CL46 1.1V 2Rx8 UDIMM for ASRock IMB-A1302/1700
A 192 GB DDR5 kit of four 48 GB UDIMMs at 5600 MT/s CL46, 1.1 V, validated for ASRock IMB-A1302 and IMB-A1700 boards
- Capacity192GB (4 x 48GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 192 GB capacity with four 48 GB modules
- DDR5 5600 speed rated at PC5-44800
- CL46 latency at 1.1 V operating voltage
- 2Rx8 dual-rank unbuffered UDIMM design
- Validated for ASRock IMB-A1302 and IMB-A1700
DDR5 5600 kit for ASRock IMB-A1302 and IMB-A1700
This 192 GB kit contains four 48 GB DDR5 5600 UDIMM modules built for ASRock Industrial Micro-ATX motherboards IMB-A1302 and IMB-A1700. The memory runs at CL46 latency and 1.1 V without ECC or heat spreaders. It targets workstations and servers that need maximum capacity on these specific boards.
Installation notes for 288-pin DDR5 UDIMM
The modules use the standard 288-pin DDR5 UDIMM form factor and install in minutes by seating each stick until the retention clips click. Common issues include mixing kits with different speeds or ranks, failing to populate all four slots for full 192 GB capacity, and not confirming the motherboard BIOS recognises the full density per DIMM.
Pre-order checks for ASRock Industrial platforms
Verify your motherboard is exactly the IMB-A1302 or IMB-A1700 model before ordering. Confirm the board supports 48 GB non-ECC unbuffered UDIMMs at DDR5 5600 and that four slots are available. Check the current BIOS version against ASRock Industrial documentation for 192 GB total capacity support.
Puncte forte
- 192 GB capacity with four 48 GB modules
- DDR5 5600 speed rated at PC5-44800
- CL46 latency at 1.1 V operating voltage
- 2Rx8 dual-rank unbuffered UDIMM design
- Validated for ASRock IMB-A1302 and IMB-A1700
Specificații
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-4828K4 |
| Capacity | 192GB (4 x 48GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASRock Industrial |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 192GB (4 x 48GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Întrebări despre acest articol
How do I verify the 192GB DDR5 5600 kit is running at CL46 1.1V after installation?
Enter the BIOS on the ASRock IMB-A1302 or IMB-A1700 and confirm the memory speed shows 5600 MT/s, CAS latency reads 46, and voltage is set to 1.10V; the POST screen should also report 192 GB total across the four slots.
What exactly ships in the MD44800-4828K4 package and do I need any extra brackets or cables?
The box contains four 48 GB 288-pin DDR5 UDIMM modules — nothing else is included and no additional brackets, cables or adapters are required for the compatible ASRock Industrial motherboards.
Should I choose the 4 x 48 GB 2Rx8 kit or a different capacity for my IMB-A1302?
Select this 192 GB kit when the board has four UDIMM slots and you need the maximum supported density; each module is a 48 GB 2Rx8 device running at DDR5 5600 CL46 1.1V.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
