NEMIX RAM
NEMIX RAM 192GB (4x48GB) DDR5 5600 CL46 1.1V ECC RDIMM Supermicro H13DSG-O-CPU
A 192GB kit of four 48GB DDR5 5600 CL46 registered ECC RDIMMs built for the Supermicro H13DSG-O-CPU motherboard
- Capacity192GB (4 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 192 GB capacity across four 48 GB modules for dense server memory
- DDR5 5600 speed rated at PC5-44800 for high bandwidth throughput
- Registered ECC design with CL46 latency corrects single-bit errors automatically
- 1 V operation reduces power draw per DIMM in full populations
- Verified 288-pin RDIMM fitment for Supermicro H13DSG-O-CPU motherboard
Exact-Match Server Kit
This 192GB kit contains four 48GB DDR5 RDIMM modules rated at 5600MHz with CL46 latency and 1.1V operation. It is built for the Supermicro H13DSG-O-CPU motherboard where the memory controller expects these precise timings, ranks and voltage. System integrators upgrading that platform receive the exact configuration the board validates at full capacity.
Registered ECC Architecture
Each module uses a 288-pin registered design with 2Rx8 organisation, so the memory controller is buffered and every slot can run fully populated without signal degradation. On-board ECC corrects single-bit errors in flight, preventing silent data corruption and unplanned reboots in production workloads. The absence of heat spreaders keeps the profile low for dense server chassis.
Lifetime Support Included
The package delivers the four-module kit ready for installation in the approved population order. A lifetime replacement warranty and free US-based technical support back the hardware, giving IT teams a direct escalation path if a module fails validation. Buyers needing UDIMM, SODIMM or non-ECC memory for workstation or consumer boards cannot use this kit.
Puncte forte
- 192 GB capacity across four 48 GB modules for dense server memory
- DDR5 5600 speed rated at PC5-44800 for high bandwidth throughput
- Registered ECC design with CL46 latency corrects single-bit errors automatically
- 1 V operation reduces power draw per DIMM in full populations
- Verified 288-pin RDIMM fitment for Supermicro H13DSG-O-CPU motherboard
Specificații
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-4828K4 |
| Capacity | 192GB (4 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 192GB 4X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Întrebări despre acest articol
What DDR5 speed and CAS latency does this kit run at on the Supermicro H13DSG-O-CPU?
The kit operates at DDR5 5600 (PC5-44800) with a CAS latency of CL46, matching the memory controller's rated specification for full-capacity recognition.
What physical slot type and pin count does this 288-pin RDIMM require?
It requires a standard 288-pin DDR5 RDIMM slot; the registered form factor is not compatible with UDIMM or SODIMM sockets on the H13DSG-O-CPU.
How should the four 48 GB modules be installed, and what step is often missed?
Populate all four slots following the motherboard manual's exact DIMM population order; the step most often missed is verifying the approved sequence before seating the modules.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



