Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Six green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 192GB 6x32GB DDR5 6400 CL52 ECC RDIMM for GIGABYTE MZ33-CP1 memory upgrade

SKU CH-T0VB-8M773

A 192 GB kit of six 32 GB DDR5-6400 ECC registered DIMMs validated for the Gigabyte MZ33-CP1 motherboard

  • Capacity192GB (6 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 192GB 6X32GB

Vedeți celelalte 24 configurații
  • 192 GB total capacity in a 6 × 32 GB kit enables maximum memory density for the GIGABYTE MZ33-CP1
  • DDR5 6400 speed with CL52 latency delivers rated throughput without down-clocking
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors on the fly
  • 10 V operation matches the board's voltage spec for stable full-population operation
  • 288-pin RDIMM form factor fits the exact slot type required by the MZ33-CP1 motherboard

Exact-match DDR5 upgrade

This 192 GB kit contains six 32 GB DDR5 6400 modules built to the precise 2Rx8 registered ECC specification the GIGABYTE MZ33-CP1 memory controller expects. Each DIMM runs at 1.1 V with CL52 timing so the board recognises full capacity at rated speed without manual tuning.

Registered architecture for full population

The 288-pin RDIMM format offloads the memory controller, allowing every slot to run fully populated at 6400 MT/s while ECC corrects single-bit errors on the fly. No heat spreader is fitted, so clearance depends on your chassis airflow rather than module height.

Replaces mixed or partial kits

Swapping mismatched or lower-capacity DIMMs for this matched 6 x 32 GB set removes population-rule conflicts and restores full-channel bandwidth. The jump is worth it when your workload needs the full 192 GB at native DDR5 6400 with registered ECC stability.

Puncte forte

  • 192 GB total capacity in a 6 × 32 GB kit enables maximum memory density for the GIGABYTE MZ33-CP1
  • DDR5 6400 speed with CL52 latency delivers rated throughput without down-clocking
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors on the fly
  • 10 V operation matches the board's voltage spec for stable full-population operation
  • 288-pin RDIMM form factor fits the exact slot type required by the MZ33-CP1 motherboard

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-328K6
Capacity192GB (6 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 6X32GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

What power limit appears first when the 192 GB kit runs continuously at 1.10 V?

Each module operates at 1.10 V DDR5 standard voltage; the registered design reduces electrical load on the memory controller so the board's VRM phase limit is reached before the DIMMs themselves.

How much heat and noise do the six RDIMMs produce under all-day load?

The modules have no heat spreaders and no moving parts, so they add only passive DRAM heat to the chassis airflow and generate zero audible noise.

What must the GIGABYTE MZ33-CP1 already provide for this 6×32 GB kit to function?

The board needs six 288-pin DDR5 RDIMM slots wired for registered ECC memory and a memory controller that accepts 2Rx8 modules at 6400 MT/s.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.