Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Eight green DDR5 RDIMM modules in anti-static tray, no heat spreaders, gold contacts visible

NEMIX RAM

NEMIX RAM 1TB 8x128GB DDR5 4800 PC5-38400 2Rx4 CL40 1.1V 288-Pin ECC Registered RDIMM Kit Supermicro H13SSL-NT

SKU CH-BTND-78N3R

Eight-module 1 TB DDR5 kit runs at 4800 MT/s with ECC and registered buffering for Supermicro H13SSL-NT servers

  • Capacity1TB (8 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 1TB 8X128GB

Vedeți celelalte 24 configurații
  • 1TB kit delivers full server capacity with eight 128GB modules
  • DDR5-4800 speed matches board spec for rated performance
  • Registered ECC design corrects errors and stabilises fully populated slots
  • 2Rx4 CL40 1.1V timing ensures controller recognition at full speed
  • 288-pin RDIMM form factor fits Supermicro H13SSL-NT memory slots

Exact-Match DDR5 Server Kit

This 1 TB kit contains eight 128 GB DDR5-4800 Registered ECC RDIMMs built to the precise rank, voltage and timing the Supermicro H13SSL-NT memory controller expects. The modules are recognised at full capacity and run at their rated 4800 MT/s speed without manual tuning.

Suited For And Not Suited For

The kit fits administrators populating every slot of a compatible Supermicro H13SSL-NT platform that requires 288-pin Registered DIMMs with ECC. It does not serve builders needing unbuffered UDIMMs, SODIMM form factors, lower-density modules or non-ECC memory for workstation or consumer boards.

Capacity And Headroom

Eight dual-rank modules deliver 1 TB of registered ECC capacity, allowing the board to run fully populated at the rated 4800 MT/s data rate while ECC corrects single-bit errors on the fly. Headroom ends when the platform's maximum supported DIMM count or total memory limit is reached.

Puncte forte

  • 1TB kit delivers full server capacity with eight 128GB modules
  • DDR5-4800 speed matches board spec for rated performance
  • Registered ECC design corrects errors and stabilises fully populated slots
  • 2Rx4 CL40 1.1V timing ensures controller recognition at full speed
  • 288-pin RDIMM form factor fits Supermicro H13SSL-NT memory slots

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-724K8
Capacity1TB (8 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1TB 8X128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Does the Supermicro H13SSL-NT motherboard need to support DDR5 4800 Registered ECC memory for this kit to function?

Yes, the board must accept DDR5 4800 RDIMM modules with ECC and registered operation; the kit is spec-matched to the H13SSL-NT so it will be recognised at full 1 TB capacity and rated speed.

Will the 2Rx4 rank organisation of these modules work with the H13SSL-NT population rules when all eight slots are filled?

The kit uses the exact 2Rx4 registered layout the motherboard expects, allowing every slot to run fully populated at 128 GB per DIMM without downclocking.

How can I confirm the kit is running at DDR5 4800 CL40 1.1 V after installation?

Check the BIOS memory information screen or a tool such as dmidecode; it should report 4800 MT/s, CAS latency 40 and 1.1 V on all eight modules.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.