Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Two green 288-pin DDR5 RDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 256GB (2x128GB) DDR5 6400 CL52 4Rx4 ECC RDIMM Supermicro X14SDV-36C-SP3F memory upgrade

SKU CH-4R45-FM9HV

256 GB DDR5 6400 CL52 4Rx4 ECC registered RDIMM kit built for the Supermicro X14SDV-36C-SP3F motherboard

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 256GB 2X128GB

  • 256 GB total capacity from two 128 GB modules for dense server workloads
  • DDR5 6400 speed rated at CL52 latency for high-throughput data handling
  • 4Rx4 registered ECC design corrects single-bit errors to protect data integrity
  • 1 V operating voltage matches the Supermicro X14SDV-36C-SP3F memory controller spec
  • 288-pin RDIMM form factor ensures mechanical and electrical fit in the target board

Server Memory Kit for Supermicro X14SDV-36C-SP3F

This 256GB kit contains two 128GB DDR5 RDIMM modules built for the Supermicro X14SDV-36C-SP3F motherboard. It targets administrators who need to populate every slot with registered ECC memory that the platform recognises at full capacity.

Registered 4Rx4 ECC at DDR5 6400 CL52

Each module is a 288-pin Registered DIMM running at DDR5 6400 (PC5-51200) with CL52 latency and 1.1V operation. The 4Rx4 organisation and registered buffer match the board's memory-controller requirements so the system boots at rated speed without down-clocking.

Low-Voltage Operation and Thermal Profile

At 1.1V the modules draw minimal power for their density, keeping heat output low inside a fully populated server chassis. No heat spreaders are fitted, so airflow across the bare PCBs handles cooling silently in normal rack environments.

Puncte forte

  • 256 GB total capacity from two 128 GB modules for dense server workloads
  • DDR5 6400 speed rated at CL52 latency for high-throughput data handling
  • 4Rx4 registered ECC design corrects single-bit errors to protect data integrity
  • 1 V operating voltage matches the Supermicro X14SDV-36C-SP3F memory controller spec
  • 288-pin RDIMM form factor ensures mechanical and electrical fit in the target board

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-744K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

What does the 6400 MT/s speed mean once these modules are installed in the Supermicro X14SDV-36C-SP3F?

The memory controller will run the kit at its rated DDR5 6400 (PC5-51200) data rate, delivering the full 51200 MB/s bandwidth per module when all slots are populated per the board's population rules.

How does the 288-pin RDIMM interface and registered design affect what the motherboard can actually use?

The 288-pin RDIMM form factor with registered architecture is required by this board; it offloads the memory controller so every slot runs fully populated at the rated 6400 speed and 256 GB total capacity.

What physical clearance and slot requirements do the 128 GB 4Rx4 modules need to fit?

Each 288-pin DDR5 RDIMM occupies one standard DIMM slot; the kit includes two modules, so two adjacent slots following the motherboard's population order are required for the full 256 GB upgrade.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.