Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Four green DDR5 RDIMM modules without heat spreaders in a kit box

NEMIX RAM

NEMIX RAM 256GB 4X64GB DDR5 5600 PC5-44800 CL46 2Rx4 1.1V ECC RDIMM Supermicro H13SST-G memory upgrade

SKU CH-4917-JFAFD

A 256GB kit of four 64GB DDR5 ECC registered RDIMMs running at 5600 MT/s with CL46 latency and 1.1V operation, validated for the Supermicro H13SST-G motherboard

  • Capacity256GB (4 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 256GB 4X64GB

Vedeți celelalte 24 configurații
  • 256 GB total capacity from four 64 GB modules for maximum memory density
  • DDR5 5600 PC5-44800 speed matches the Supermicro H13SST-G memory controller for rated performance
  • Registered ECC RDIMM with 2Rx4 rank offloads the controller and corrects single-bit errors on the fly
  • 1 V operation at CL46 latency delivers stable enterprise-grade timing across all populated slots
  • Exact-fit 288-pin RDIMM kit validated for Supermicro H13SST-G motherboard population rules

Supermicro H13SST-G DDR5 256GB kit

This 256GB kit provides four 64GB DDR5 5600 RDIMM modules built for the Supermicro H13SST-G motherboard. Registered ECC operation with 2Rx4 organisation and 1.1V voltage matches the platform's memory controller requirements for full-capacity recognition.

Installation fits 288-pin RDIMM slots only

The modules use the 288-pin RDIMM form factor required by this board; UDIMM or SODIMM modules will not seat. Consult the motherboard manual for the approved population order before installing all four slots to avoid a no-post condition.

DDR5 5600 bandwidth and population limits

The PC5-44800 interface runs at 5600 MT/s with CL46 latency when the memory controller supports the full 2Rx4 load across every channel. Maximum capacity and speed depend on the CPU and BIOS revision installed in the H13SST-G system.

Puncte forte

  • 256 GB total capacity from four 64 GB modules for maximum memory density
  • DDR5 5600 PC5-44800 speed matches the Supermicro H13SST-G memory controller for rated performance
  • Registered ECC RDIMM with 2Rx4 rank offloads the controller and corrects single-bit errors on the fly
  • 1 V operation at CL46 latency delivers stable enterprise-grade timing across all populated slots
  • Exact-fit 288-pin RDIMM kit validated for Supermicro H13SST-G motherboard population rules

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K4
Capacity256GB (4 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 4X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

How do I verify the kit is running at DDR5 5600 CL46 with ECC active after installation?

Enter the BIOS or UEFI and confirm the memory speed reads 5600 MT/s, CAS latency shows 46, voltage is set to 1.10 V, and ECC is reported as enabled for all four 64 GB modules.

What ships in the box and do I need any extra parts to install it in a Supermicro H13SST-G?

The box contains the 256 GB kit as four 64 GB 288-pin DDR5 RDIMMs; no additional components are required for installation in the supported motherboard.

Which capacity and rank configuration should I select for full 256 GB support on this board?

Choose the 4 x 64 GB 2Rx4 kit (part number MR44800-924K4) to reach 256 GB with the registered ECC layout the H13SST-G expects.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.