Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

NEMIX RAM

NEMIX RAM 256GB 8x32GB DDR5 5600MHz PC5-44800 CL46 2Rx8 1.1V ECC Registered RDIMM memory upgrade

SKU CH-BREJ-1R6E9

Eight-module 256 GB DDR5 kit with ECC, registered buffering, 5600 MHz speed and CL46 latency for Supermicro H13SSH servers

  • Capacity256GB (8 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 256 GB total capacity from eight 32 GB modules for dense server workloads
  • DDR5 5600 MHz rated speed with CL46 latency for high-throughput data paths
  • Registered ECC RDIMM architecture corrects single-bit errors and stabilises fully populated channels
  • 1 V operating voltage reduces power draw per module in large configurations
  • Verified compatible with Supermicro H13SSH motherboard using 288-pin RDIMM form factor

Exact-match server upgrade

This 256 GB kit contains eight 32 GB DDR5 5600 MHz modules built to the PC5-44800 standard with CL46 latency and 1.1 V operation. The 2Rx8 registered ECC RDIMM design matches the memory controller requirements of the Supermicro H13SSH motherboard so the full capacity is recognised at rated speed.

Thermals noise and power

Each module runs at the standard DDR5 voltage of 1.1 V without a heat spreader, relying on the server chassis airflow for cooling. Registered buffering reduces the electrical load on the memory controller, keeping power draw predictable across all eight slots during normal operation.

Sustained load behaviour

The registered architecture and on-die ECC maintain signal integrity and correct single-bit errors continuously, preventing silent data corruption during long-running workloads. Full population at the rated 5600 MHz speed is supported when the motherboard population rules are followed.

Puncte forte

  • 256 GB total capacity from eight 32 GB modules for dense server workloads
  • DDR5 5600 MHz rated speed with CL46 latency for high-throughput data paths
  • Registered ECC RDIMM architecture corrects single-bit errors and stabilises fully populated channels
  • 1 V operating voltage reduces power draw per module in large configurations
  • Verified compatible with Supermicro H13SSH motherboard using 288-pin RDIMM form factor

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K8
Capacity256GB (8 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 8X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Întrebări despre acest articol

How do I install the 288-pin DDR5 RDIMM modules on the Supermicro H13SSH motherboard and what step is commonly missed?

Power down, open the chassis, and insert each 32 GB module into the slots listed in the board manual following the exact population order; the step most often missed is enabling the correct memory profile in BIOS so the kit runs at 5600 MT/s with CL46 timing.

What maintenance or replacement will the 256 GB DDR5 ECC RDIMM kit need over its service life?

The modules have no heat spreaders and no moving parts, so no routine maintenance is required; replacement is only necessary if a DIMM fails, at which point the lifetime warranty covers a swap.

What limit appears first when the 8 x 32 GB DDR5 5600 kit runs sustained workloads on the H13SSH?

The registered buffer and ECC logic keep signal integrity at full 5600 MT/s across all eight slots, so the first limit encountered is the motherboard's maximum supported capacity rather than a memory speed or voltage ceiling.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.