SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 USD
0.00500875BTC
În stoc
NEMIX RAM
NEMIX RAM 2TB (16x128GB) DDR5 5600 CL46 4Rx4 ECC RDIMM memory upgrade
A 2 TB registered DDR5 kit containing sixteen 128 GB modules running at 5600 MT/s with CL46 latency and ECC for Supermicro servers
- Capacity2TB (16 x 128GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 2 TB total capacity from 16 modules of 128 GB each
- DDR5 5600 speed rated at PC5-44800 for high-throughput workloads
- ECC registered design detects and corrects data errors in mission-critical systems
- 1 V operating voltage reduces power draw across dense server configurations
- Validated for Supermicro B13DET motherboard compatibility
2 TB DDR5 5600 ECC RDIMM kit
This kit delivers 2 TB of registered DDR5 memory in sixteen 128 GB modules. It targets Supermicro server and workstation platforms that require ECC protection and high capacity for virtualization, databases or AI training workloads.
Sustained-load behaviour
Registered buffering and on-die ECC maintain data integrity during continuous multi-threaded operation at 5600 MT/s. The 1.10 V operating voltage keeps power draw stable across fully populated channels without thermal throttling.
4Rx4 rank architecture
Each module uses a quad-rank 4Rx4 organisation, so the memory controller must support four ranks per DIMM slot to address the full 128 GB per module. Systems limited to dual-rank or single-rank DIMMs will not recognise the capacity.
Puncte forte
- 2 TB total capacity from 16 modules of 128 GB each
- DDR5 5600 speed rated at PC5-44800 for high-throughput workloads
- ECC registered design detects and corrects data errors in mission-critical systems
- 1 V operating voltage reduces power draw across dense server configurations
- Validated for Supermicro B13DET motherboard compatibility
Specificații
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | Supermicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR44800-744K16 |
| Capacity | 2TB (16 x 128GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-PIN DDR5 RDIMM |
| Rank | 4Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 2TB (16X128GB) DDR5 5600MHZ PC5-44800 4Rx4 1.1V CL46 288-PIN ECC RDIMM Registered Server Memory KIT |
Întrebări despre acest articol
How much power does the 1.1 V DDR5 kit draw under sustained load?
Each module operates at 1.1 V, the standard DDR5 voltage, so total draw scales with the 16 DIMMs installed; exact wattage depends on the server's memory controller and workload.
What motherboard slots and chipset are required for these 288-pin RDIMMs?
The kit needs a Supermicro motherboard with DDR5 RDIMM slots that support 4Rx4 registered ECC modules at 5600 MT/s; the B13DET is the validated platform.
Will the CL46 5600 MT/s modules downclock reliably in a system that only runs DDR5 4800?
Yes, DDR5 RDIMMs negotiate speed at boot, so the 5600 MT/s CL46 sticks will run at 4800 MT/s with matching latency when the platform dictates.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
