Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Two green DDR4 SODIMM modules, 260-pin, no heat spreader

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR4 2666 CL19 SODIMM POSIFLEX RT-2016-G2

SKU CH-53GT-HXTS2

32 GB kit of two 16 GB DDR4 2666 CL19 SODIMMs built for POSIFLEX RT-2016-G2 terminals

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 2666 (PC4 21300)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32GB dual-channel kit boosts multitasking headroom
  • DDR4 2666 speed matches POS terminal spec
  • CL19 latency keeps response times tight
  • 2V operation reduces power draw and heat
  • 260-pin SODIMM form factor fits POSIFLEX RT-2016-G2 slot

POSIFLEX RT-2016-G2 compatible SODIMM kit

This 32 GB kit (2 x 16 GB) is built specifically for the POSIFLEX RT-2016-G2 terminal. It uses DDR4 2666 unbuffered non-ECC modules that match the system's native memory specification. IT teams and service technicians can deploy it to restore or expand memory capacity in deployed kiosks.

Single specification that decides fit

The terminal requires 260-pin DDR4 SODIMMs running at 2666 MT/s with CL19 latency at 1.2 V. These modules meet that exact electrical and mechanical profile. Buyers who need ECC, registered buffers, a different pin count or a higher speed grade cannot use this kit.

Installation notes and common pitfalls

The SODIMM slots are accessible after removing the terminal's rear cover; no tools beyond a small screwdriver are typically required. The most frequent issue is inserting a module at an angle until the retention clips click — if the clips do not engage, the system will not POST. Verify both sticks are seated fully before reassembling the chassis.

Puncte forte

  • 32GB dual-channel kit boosts multitasking headroom
  • DDR4 2666 speed matches POS terminal spec
  • CL19 latency keeps response times tight
  • 2V operation reduces power draw and heat
  • 260-pin SODIMM form factor fits POSIFLEX RT-2016-G2 slot

Specificații

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2666MHZ Non-ECC Unbuffered SODIMM
Part NumberMS21300-628K2
Capacity32GB (2 x 16GB)
SpeedDDR4 2666 (PC4 21300)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL19
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content32GB (2X16GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 260-PIN Non-ECC Unbuffered SODIMM KIT

Întrebări despre acest articol

What does the 2666 MHz rating deliver inside the POSIFLEX RT-2016-G2 terminal?

The modules run at DDR4 2666 (PC4-21300) with CL19 latency, providing the rated bandwidth and timing the terminal's memory controller expects for stable operation.

Which SODIMM standard and pin count does this kit use?

It uses 260-pin DDR4 SODIMM modules, the standard form factor for the POSIFLEX RT-2016-G2's memory slots.

What physical space and voltage do the two 16 GB modules require?

Each module is a low-profile 260-pin SODIMM operating at 1.20 V, designed to fit the terminal's internal memory compartment without a heat spreader.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.