Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Two green DDR5 RDIMM modules without heat spreaders in a 32GB kit

NEMIX RAM

NEMIX RAM 32GB 2x16GB DDR5 4800 CL40 1Rx8 ECC Registered RDIMM Supermicro H14SSL-NT

SKU CH-TDVF-27SXH

32 GB dual-channel DDR5 kit running at 4800 MT/s with CL40 latency, 1.1 V registered ECC modules validated for Supermicro H14SSL-NT servers

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 32GB 2X16GB

Vedeți celelalte 24 configurații
  • 32 GB capacity from two 16 GB modules lets your server handle larger workloads
  • DDR5 4800 speed with CL40 latency delivers rated bandwidth for the H14SSL-NT
  • Registered ECC design corrects single-bit errors and supports full population stability
  • 1 V operation matches the motherboard's voltage requirement for reliable startup
  • 288-pin RDIMM form factor fits the exact slot type the board requires

Exact-fit DDR5 ECC RDIMM for Supermicro H14SSL-NT

This 32 GB kit contains two 16 GB DDR5-4800 registered DIMMs built to the precise 1Rx8 rank, 1.1 V voltage and CL40 timing the motherboard expects. The modules are tested for full-speed recognition and stable operation in every supported slot.

Who this suits and who should look elsewhere

Server administrators upgrading or populating a Supermicro H14SSL-NT platform with registered ECC memory will find the correct form factor and validated specifications here. Builders needing unbuffered UDIMMs, SODIMMs, non-ECC modules or capacities beyond the board's qualified list should select a different product.

What the kit changes for your build

The matched pair enables dual-channel bandwidth at the rated 4800 MT/s while registered buffering reduces electrical load on the memory controller. On-die ECC corrects single-bit errors in real time, protecting data integrity without additional software or configuration steps.

Puncte forte

  • 32 GB capacity from two 16 GB modules lets your server handle larger workloads
  • DDR5 4800 speed with CL40 latency delivers rated bandwidth for the H14SSL-NT
  • Registered ECC design corrects single-bit errors and supports full population stability
  • 1 V operation matches the motherboard's voltage requirement for reliable startup
  • 288-pin RDIMM form factor fits the exact slot type the board requires

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Do I need a Supermicro H14SSL-NT motherboard with DDR5 RDIMM slots for this kit to work?

Yes, the 288-pin DDR5 Registered DIMMs are validated for the Supermicro H14SSL-NT and require that board's DDR5 RDIMM slots to operate.

Can I populate the remaining slots with other DDR5 4800 1Rx8 ECC RDIMMs?

The registered architecture lets every slot run fully populated at DDR5 4800, so matching 1Rx8 ECC RDIMMs can be added following the board's population rules.

How do I confirm the kit runs at DDR5 4800 CL40 1.1V after installation?

Check the BIOS memory information or a tool such as dmidecode; it should report 4800 MT/s, CL40, 1.10 V and 32 GB total across both modules.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.