BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.0028093BTC
În stoc
NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR5 5600 CL46 1.1V 262-Pin SODIMM Kit for ASRock IMB-X1240-WV
A 32 GB kit of two 16 GB DDR5 5600 CL46 SODIMMs at 1.1 V built for the ASRock IMB-X1240-WV Mini-ITX board
- Capacity32GB (2 x 16GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 32 GB kit expands multitasking headroom with two 16 GB modules
- DDR5 5600 speed feeds data to the CPU at PC5-44800 bandwidth
- CL46 latency keeps response tight for everyday workloads
- 1 V operation reduces power draw and heat in compact builds
- 262-pin SODIMM form factor fits the ASRock IMB-X1240-WV Mini-ITX board
Capacity and fit
This 32 GB kit contains two 16 GB DDR5 SODIMM modules built for the ASRock IMB-X1240-WV Mini-ITX motherboard. Each stick uses a 262-pin layout and runs at the standard 1.1 V DDR5 voltage. The kit targets integrators and technicians upgrading that specific industrial board.
Sustained behaviour
The memory operates at DDR5 5600 with a CAS latency of CL46 and a 1Rx8 rank configuration. Non-ECC unbuffered chips from major OEM sources handle continuous workloads without error-correction overhead. No heat spreader is fitted, so airflow in the chassis determines thermal headroom during extended use.
Installation notes
Modules insert vertically into the board’s SODIMM slots; the keyed 262-pin edge connector prevents misalignment. Common issues arise when only one module is populated or when the BIOS is not updated to recognise the full 32 GB capacity. The kit ships as a matched pair to avoid timing mismatches.
Puncte forte
- 32 GB kit expands multitasking headroom with two 16 GB modules
- DDR5 5600 speed feeds data to the CPU at PC5-44800 bandwidth
- CL46 latency keeps response tight for everyday workloads
- 1 V operation reduces power draw and heat in compact builds
- 262-pin SODIMM form factor fits the ASRock IMB-X1240-WV Mini-ITX board
Specificații
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered SODIMM Memory |
| Part Number | MS44800-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASRock |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 262-Pin DDR5 SODIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 32GB (2 x 16GB) DDR5 5600MHz PC5-44800 1Rx8 1.1V 262-PIN Non-ECC SODIMM KIT |
Întrebări despre acest articol
Will the 1.1V DDR5 modules run hot inside the ASRock IMB-X1240-WV during continuous operation?
The kit operates at the standard DDR5 voltage of 1.10V without a heat spreader, so thermals depend on the Mini-ITX chassis airflow rather than the modules themselves.
Does the ASRock IMB-X1240-WV need a specific BIOS version or firmware update before installing this 5600 CL46 kit?
The memory is validated for the ASRock Industrial IMB-X1240-WV Mini-ITX motherboard; any required firmware steps would be detailed in that board's own documentation.
Can I populate the board's second SODIMM slot with a different capacity module while keeping this 2x16GB kit installed?
This 32GB kit fills both slots as a matched 2x16GB pair; mixing capacities or ranks is not recommended for stable dual-channel operation.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
