Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Four green DDR4 memory sticks with black chips and gold contacts

NEMIX RAM

NEMIX RAM 32GB (4 x 8GB) DDR4 2400MHz ECC UDIMM Kit

SKU CH-W29Y-F9MTG

Four 8 GB DDR4 ECC UDIMMs totalling 32 GB at 2400 MHz with 1.2 V operation

  • Capacity32GB (4 x 8GB)
  • SpeedDDR4 2400 (PC4 19200)
  • CAS Latency17
  • Voltage1.2V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 32 GB kit expands server capacity
  • ECC detects and corrects memory errors
  • DDR4 2400 MHz speed matches system bus
  • 2 V operation reduces power draw
  • Four 8 GB unbuffered modules install easily

32GB DDR4 ECC UDIMM Kit

This kit provides 32GB of DDR4 server memory across four 8GB unbuffered ECC modules. It runs at 2400MHz with a CAS latency of 17 and operates at 1.2V. The 288-pin DIMMs use major OEM chips from Samsung, Micron or Hynix.

Suited for servers needing ECC integrity

The unbuffered ECC design suits workstations and entry-level servers that require error correction without registered modules. Systems that only accept registered or load-reduced DIMMs cannot use this kit. Buyers needing higher capacities per slot or faster speeds should look elsewhere.

Lifetime replacement coverage included

NEMIX RAM backs the modules with a lifetime replacement warranty, reducing long-term ownership risk. No additional software, cooling accessories or mounting hardware are bundled with the memory kit. The package contains only the four UDIMM modules.

Puncte forte

  • 32 GB kit expands server capacity
  • ECC detects and corrects memory errors
  • DDR4 2400 MHz speed matches system bus
  • 2 V operation reduces power draw
  • Four 8 GB unbuffered modules install easily

Specificații

BrandNEMIX RAM
ModelPart#: ME19200-818K4-SM-SYS-5019S-L
Part NumberPart#: ME19200-818K4-SM-SYS-5019S-L
Capacity32GB (4 x 8GB)
SpeedDDR4 2400 (PC4 19200)
CAS Latency17
Voltage1.2V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix

Întrebări despre acest articol

What motherboard slot and voltage must my system provide for these 288-PIN DDR4 1.2V modules?

The kit uses 288-pin DDR4 UDIMM slots and runs at 1.2V, so the board must support unbuffered DDR4 at that voltage.

Will these 1Rx8 ECC UDIMMs run with older non-ECC DDR4 sticks I keep installed?

Mixing ECC and non-ECC DDR4 typically disables error correction or prevents boot; the board will treat all slots as non-ECC.

How do I confirm the kit is running at PC4-19200 with CL17 after installation?

Check the BIOS memory information or a tool such as CPU-Z; it should report 2400 MT/s, CAS 17 and ECC active.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.