Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Four green DDR4 UDIMM modules without heat spreaders, 288 pins each

NEMIX RAM

NEMIX RAM 32GB (4x8GB) DDR4 2666 CL19 ECC UDIMM server RAM

SKU CH-DBX7-KTQZ3

A 32 GB kit of four 8 GB DDR4 2666 CL19 ECC UDIMM modules at 1.20 V for server and workstation memory upgrades

  • Capacity32GB (4 x 8GB)
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes

Capacity 32GB (4 x 8GB)

  • 32 GB total capacity across four 8 GB modules
  • ECC error correction protects data integrity in servers
  • DDR4 2666 speed with CL19 latency for responsive performance
  • 20 V operation reduces power draw and heat
  • 288-pin UDIMM form factor fits compatible motherboards

Server memory kit for ECC workloads

This NEMIX RAM kit provides 32GB of DDR4 ECC unbuffered memory in a matched set of four 8GB modules. It targets administrators and builders who need error-correcting capacity for servers, workstations or NAS devices that accept standard UDIMM slots.

Thermal and electrical profile

Modules run at 1.20V with no heat spreaders attached, relying on case airflow for cooling. The DDR4 2666 speed and CL19 latency operate within standard JEDEC power limits, so no extra voltage or active cooling is required during normal operation.

Tested compatibility and support

Every module undergoes stress testing under load before shipping, and the kit is built with major OEM Samsung, Micron or Hynix chips. NEMIX RAM backs the memory with a lifetime replacement warranty and US-based IT support for troubleshooting installation or stability issues.

Puncte forte

  • 32 GB total capacity across four 8 GB modules
  • ECC error correction protects data integrity in servers
  • DDR4 2666 speed with CL19 latency for responsive performance
  • 20 V operation reduces power draw and heat
  • 288-pin UDIMM form factor fits compatible motherboards

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 ECC Unbuffered UDIMM Memory
Part NumberME21300-818K4
Capacity32GB (4 x 8GB)
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

How do I install the 288-pin DDR4 UDIMM modules and what step is often missed?

Align the notch on each 288-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that all 32GB are detected at 2666 MT/s; the step often missed is seating every module fully so both clips engage.

What maintenance or replacement will the 1Rx8 ECC UDIMM kit need over time?

The modules have no heat spreaders and no moving parts, so no routine maintenance is required; replacement is only necessary if a module fails, which is covered by the lifetime replacement warranty.

What limit appears first when the 1.20 V CL19 kit runs under sustained load?

The primary limit is the DDR4 2666 MT/s data rate and CL19 latency; without heat spreaders, thermal throttling can occur before voltage or rank limits are reached.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.