BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00278589BTC
În stoc
NEMIX RAM
NEMIX RAM 32GB (4x8GB) DDR4 2666MHz CL19 1.2V 288-pin UDIMM memory upgrade
A 32 GB DDR4 2666 MHz kit of four 8 GB unbuffered UDIMMs at 1.2 V, CL19, validated for ASUS motherboards
- Capacity32GB (4 x 8GB)
- SpeedDDR4 2666 (PC4 21300)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32 GB kit expands system capacity for multitasking
- DDR4 2666 speed matches compatible ASUS motherboard specs
- CL19 latency with 1.2 V voltage balances timing and efficiency
- 288-pin UDIMM form factor fits standard desktop DIMM slots
- Four 8 GB modules enable quad-channel population on supported boards
ASUS-compatible DDR4 2666 kit
This NEMIX RAM kit supplies 32GB of DDR4 2666 memory across four 8GB UDIMM modules. It is built for desktop PCs that use ASUS motherboards and accept non-ECC unbuffered DIMMs at 1.2V. The CL19 timing and 1Rx8 organisation are set for standard JEDEC operation without manual tuning.
Desktop upgraders targeting ASUS platforms
The kit suits owners of compatible ASUS desktop boards who want a straightforward capacity increase to 32GB. It is not for systems that require registered or ECC memory, nor for builds limited to two DIMM slots. Buyers needing speeds above 2666MT/s or lower latencies should look at other modules.
DDR4 2666 288-pin UDIMM interface
The decisive specification is the DDR4 2666 288-pin UDIMM form factor with non-ECC unbuffered signalling at 1.2V. Only motherboards that explicitly support this exact memory type will recognise and run the kit at its rated 2666MT/s CL19 settings.
Puncte forte
- 32 GB kit expands system capacity for multitasking
- DDR4 2666 speed matches compatible ASUS motherboard specs
- CL19 latency with 1.2 V voltage balances timing and efficiency
- 288-pin UDIMM form factor fits standard desktop DIMM slots
- Four 8 GB modules enable quad-channel population on supported boards
Specificații
| Brand | NEMIX RAM |
|---|---|
| Series | ASUS Gaming Motherboard Compatible Series Memory |
| Model | ASUS DDR4 2666MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD21300-818K4 |
| Capacity | 32GB (4 x 8GB) |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | ASUS |
| CAS Latency | CL19 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (4X8GB) DDR4 2666MHZ PC4-21300 1Rx8 1.2V CL19 288-PIN Non-ECC Unbuffered UDIMM KIT |
Întrebări despre acest articol
Will the 2666MHz speed and CL19 timings work with my existing DDR4 modules that run at a lower frequency?
The kit runs at DDR4-2666 (PC4-21300) with CL19 latency at 1.2V; the motherboard will automatically down-clock all installed DIMMs to the speed of the slowest module.
How can I verify the kit is running at the rated 2666MHz and CL19 after installation?
Enter the UEFI/BIOS or open a system-info utility and check that the memory frequency reads 2666MT/s and the CAS latency shows 19.
Does the MD21300-818K4 package include only the four 8GB UDIMMs or are any cables or tools supplied?
The box contains only the four 8GB 288-pin DDR4 UDIMM modules; no cables, screws or tools are included.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
