NEMIX RAM
NEMIX RAM 32GB DDR5 4800 CL40 1.1V 1Rx4 ECC RDIMM Cisco UCS X410c M7 memory upgrade
32 GB DDR5 ECC registered RDIMM running at 4800 MT/s with CL40 latency and 1.1 V for Cisco UCS X410c M7 compute nodes
- Capacity32GB
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 32 GB capacity expands server memory headroom for demanding workloads
- DDR5 4800 speed delivers high bandwidth for compute-intensive tasks
- ECC registered design protects data integrity in mission-critical environments
- 1 V operation reduces power draw per module
- Validated for Cisco UCS X410c M7 compute node compatibility
Cisco UCS X410c M7 memory upgrade
This 32GB DDR5 RDIMM is built for the Cisco UCS X410c M7 compute node. It delivers registered ECC memory for server workloads that demand data integrity and stable operation. The module fits the platform's 288-pin DDR5 slots and runs at 4800 MT/s. It targets IT teams upgrading memory in compatible Cisco servers.
Single 32GB registered ECC module
The package contains one 32GB stick rated at PC5-38400 with CL40 latency at 1.10V. Registered buffering and ECC correct single-bit errors and reduce electrical load on the memory controller. Major OEM DRAM from Samsung, Micron or Hynix is used. No heat spreader is included, matching the form factor required by the compute node.
Suits Cisco UCS X410c M7 upgrades
This module suits administrators adding capacity to a qualified Cisco UCS X410c M7 node. Builders needing unbuffered UDIMMs, non-ECC memory, different speeds or higher capacities per slot should look elsewhere. Compatibility is limited to the specified Cisco system.
Puncte forte
- 32 GB capacity expands server memory headroom for demanding workloads
- DDR5 4800 speed delivers high bandwidth for compute-intensive tasks
- ECC registered design protects data integrity in mission-critical environments
- 1 V operation reduces power draw per module
- Validated for Cisco UCS X410c M7 compute node compatibility
Specificații
| Brand | NEMIX RAM |
|---|---|
| Series | Cisco Server Compatible Series Memory |
| Model | Cisco DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-314K1 |
| Capacity | 32GB |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Cisco |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 1Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 32GB (1X32GB) DDR5 4800MHZ PC5-38400 1Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory |
Întrebări despre acest articol
Will the 1.1 V registered ECC RDIMM need any firmware updates or periodic replacement in a Cisco UCS X410c M7?
The module is validated for the Cisco UCS X410c M7 and carries a lifetime replacement guarantee; no scheduled firmware updates or preventive swaps are required.
What limits sustained throughput on this 4800 MT/s CL40 1Rx4 module?
The CL40 latency at 4800 MT/s and single-rank 1Rx4 organisation set the bandwidth ceiling under continuous load.
How much heat and noise does the 288-pin DDR5 stick add when the server runs all day?
Operating at 1.10 V without a heat spreader, the RDIMM contributes minimal extra heat and produces no audible noise.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.



